Δεχόμαστε κρυπτονομίσματα — έτσι ώστε αυτά που κατέχετε να μπορούν να αγοράσουν πραγματικό εξοπλισμό.Πληρώστε σε κρυπτονομίσματα, ξοδέψτε τα σε πραγματικό εξοπλισμό. Δωρεάν ασφαλισμένη αποστολή παγκοσμίως άνω των 399 $. Ουδέτερες κούτες αποστολής, χωρίς σήμανση, από τη Γερμανία.Δωρεάν ασφαλισμένη αποστολή άνω των 399 $. Η ισοτιμία σας κλειδώνει για 30 λεπτά μόλις ανοίξει το ταμείο.Κλείδωμα ισοτιμίας 30 λεπτών. Κάθε προϊόν είναι σφραγισμένο, ελεγμένο ως προς τον σειριακό αριθμό του, και καλύπτεται από εγγύηση 24 μηνών.Σφραγισμένο, με εγγύηση 24 μηνών.

Παρακολουθούμενα είδη Σύνδεση

HP

HP 844023-001 800GB SAS 12Gb/s 3.5-inch internal SSD

SKU CH-R4F3-H57Z6

800 GB internal SAS 12 Gb/s solid-state drive fits 3.5-inch bays and weighs 3.0000 kg

  • Device TypeInternal Solid State Drive (SSD)
  • Weight3.0000
  • High-capacity storage with 800GB for demanding workloads
  • Fast data transfer via SAS 12Gb/s interface
  • Fits standard servers with 3.5-inch form factor
  • Ready to deploy as a new drive with part number 844023-001

HP 800 GB SAS 12 Gb/s 3.5-inch SSD

This internal solid-state drive provides 800 GB of capacity and connects through a 12 Gb/s SAS interface. It fits standard 3.5-inch drive bays in servers and storage arrays. The drive is intended for workloads that demand consistent read and write performance with enterprise-grade endurance.

Thermals noise and power draw

The SSD operates silently because it has no moving parts. Power consumption remains low during typical mixed workloads, reducing heat output inside the chassis. Standard server airflow is sufficient to keep the drive within its normal operating temperature range. No additional cooling measures are required for normal use.

Βασικά χαρακτηριστικά

  • High-capacity storage with 800GB for demanding workloads
  • Fast data transfer via SAS 12Gb/s interface
  • Fits standard servers with 3.5-inch form factor
  • Ready to deploy as a new drive with part number 844023-001

Προδιαγραφές

Device TypeInternal Solid State Drive (SSD)
Weight3.0000

Ερωτήσεις για αυτό το προϊόν

How do I install the 3.5-inch SAS drive in a server bay?

Slide the 3.5-inch drive into a compatible SAS bay until the connector seats firmly, then secure it with the tray screws or tool-less latch; the common mistake is leaving the SAS data and power connectors partially inserted, which causes link errors at 12 Gb/s.

What maintenance or replacement will the 800GB SAS SSD need over time?

The 800GB SAS SSD has no moving parts, so routine maintenance is limited to firmware updates from the server vendor and monitoring SMART health attributes; plan replacement when the drive reaches its rated write endurance or shows reallocated sector growth.

Επίσης σε αυτό το ράφι

Οι πελάτες σύγκριναν και αυτά

Ίδιο ράφι, ίδιο ταμείο — οκτώ νομίσματα και κλείδωμα ισοτιμίας 30 λεπτών.