Silver 2.5 inch SAS hard drive in black carrier tray

HP DG146ABAB4 146GB 10000RPM 2.5" SAS 3Gbps internal hard drive

SKU CH-QG8P-Z13VF

A 146 GB, 10 000 RPM 2.5-inch SAS 3 Gbps internal hard drive with a SMART carrier caddy included

146 GB capacity stores critical server data
10000 RPM spindle speed accelerates transaction workloads
SAS 3 Gbps interface connects to compatible controllers
5 inch form factor fits dense drive bays
Includes Smart Carrier caddy for tool-less installation

19,99 $

0.00025511 BTC με τη σημερινή ισοτιμία

Διαθέσιμο · αποστολή σήμερα

Το ταμείο κλειδώνει την ισοτιμία σας για 30 λεπτά.

Παράδοση προς Ηνωμένες Πολιτείες εκτίμηση

UPS Worldwide Expedited 3–6 εργάσιμες ημέρες 39,90 $
DHL Express Worldwide 2–3 εργάσιμες ημέρες 74,90 $

Προσθέστε 379,01 $ ακόμη και η βασική αποστολή γίνεται δωρεάν.

Οι εισαγωγικοί δασμοί επιβάλλονται κατά την άφιξη από τη χώρα σας.

Αποστολή αλλού

146GB 10K RPM SAS Drive with Caddy

This new HP DG146ABAB4 is a 2.5-inch internal hard drive that spins at 10000 RPM and connects through a SAS 3Gbps interface. It delivers 146GB of capacity and ships with a SMART CARRIER caddy tray for direct installation in compatible bays.

Suits Enterprise Servers Needing Fast SAS Storage

Administrators who require a 10K RPM SAS drive for existing 3Gbps backplanes will find the correct form factor and carrier included. Buyers who need larger capacity or a different interface protocol should look elsewhere.

SAS 3Gbps Interface Determines Compatibility

The drive communicates over a SAS 3Gbps link, so the host controller or backplane must support that exact signalling rate. Verify the system accepts 2.5-inch SAS drives before purchase.

Βασικά χαρακτηριστικά

146 GB capacity stores critical server data
10000 RPM spindle speed accelerates transaction workloads
SAS 3 Gbps interface connects to compatible controllers
5 inch form factor fits dense drive bays
Includes Smart Carrier caddy for tool-less installation

Προδιαγραφές

Δεν έχουν δημοσιευτεί ακόμη προδιαγραφές για αυτό το προϊόν.

Ερωτήσεις για αυτό το προϊόν

What controller or backplane is needed to run the DG146ABAB4 at its rated 3 Gbps SAS speed?

A SAS controller or backplane that supports 3 Gbps SAS signalling is required; the drive uses a standard SAS connector and will negotiate the highest speed both ends support.

Will the DG146ABAB4 operate alongside 3 Gbps SAS drives already installed in the same enclosure?

Yes, multiple 3 Gbps SAS drives can share the same bus; each device negotiates independently so existing 3 Gbps drives are unaffected.

How can I verify the DG146ABAB4 is running at 10000 RPM and 3 Gbps after installation?

Check the controller BIOS or OS utility for the reported link speed of 3 Gbps and rotational speed of 10000 RPM; SMART data will also confirm the drive model DG146ABAB4.

Επίσης σε αυτό το ράφι