HP
HP EX900 250GB M.2 2280 internal SSD 2YY43AA#ABC
250 GB M.2 2280 internal SSD with PCIe 3.0 x4 interface delivering up to 2100 MB/s read and 1300 MB/s write speeds
- Device TypeInternal Solid State Drive (SSD)
- Used ForConsumer
- Form FactorM.2 2280
- Capacity250GB
- Memory Components3D TLC
- InterfacePCI-Express 3.0 x4
- Sequential read speed reaches 2100 MB/s for rapid data access
- Sequential write speed hits 1300 MB/s to accelerate file transfers
- Random read IOPS of 120000 deliver snappy application launches
- MTBF of 2000000 hours indicates long-term drive reliability
- Low idle power of 0.68W extends battery life in portables
HP EX900 250GB NVMe SSD
The HP EX900 is a 250GB internal solid state drive built on an M.2 2280 form factor with a PCI-Express 3.0 x4 interface. It uses 3D TLC NAND and an HP controller to deliver sequential reads up to 2100 MBps and writes up to 1300 MBps for consumer workloads.
Sustained load behaviour
Random read performance reaches 120,000 IOPS while random writes hit 105,000 IOPS, with read latency of 0.028 ms and write latency of 0.035 ms. Active power draw is 2.99W and idle consumption is 0.68W, supporting consistent throughput during extended sessions.
Upgrade perspective
The drive upgrades systems limited by older storage interfaces when the motherboard provides an M.2 slot wired for PCIe 3.0 x4. A 100 TBW endurance rating and 2,000,000 hour MTBF indicate the jump is worthwhile for users needing higher sequential bandwidth and lower latency.
Βασικά χαρακτηριστικά
- Sequential read speed reaches 2100 MB/s for rapid data access
- Sequential write speed hits 1300 MB/s to accelerate file transfers
- Random read IOPS of 120000 deliver snappy application launches
- MTBF of 2000000 hours indicates long-term drive reliability
- Low idle power of 0.68W extends battery life in portables
Προδιαγραφές
| Brand | HP |
|---|---|
| Series | EX900 |
| Model | 2YY43AA#ABC |
| Device Type | Internal Solid State Drive (SSD) |
| Used For | Consumer |
| Form Factor | M.2 2280 |
| Capacity | 250GB |
| Memory Components | 3D TLC |
| Interface | PCI-Express 3.0 x4 |
| Controller | HP |
| Max Sequential Read | Up to 2100 MBps |
| Max Sequential Write | Up to 1300 MBps |
| 4KB Random Read | Up to 120,000 IOPS |
| 4KB Random Write | Up to 105,000 IOPS |
| Read Latency | 0.028 ms |
| Write Latency | 0.035 ms |
| MTBF | 2,000,000 hours |
| Features | High performance Low power Increased system responsiveness High reliability Small form-factor Minimum weight Enhanced ruggedness High data Integrity and Security |
| Power Consumption (Idle) | 0.68W |
| Power Consumption (Active) | 2.99W |
| Operating Temperature | 0°C ~ +70°C |
| Storage Temperature | -40°C ~ +85°C |
| Operating Humidity | 5-95% |
| Max Shock Resistance | 100G / 6 msec |
| Max Vibration Resistance | 3.1 GRMS (2-500 Hz) |
| Height | 2.40mm |
| Width | 22.00mm |
| Depth | 80.00mm |
| Weight | 5.40g |
| Βάρος αποστολής | 0.08 kg |
| Διαστάσεις συσκευασίας | 173 × 97 × 20 mm |
Ερωτήσεις για αυτό το προϊόν
Will this 250 GB drive fit my laptop's M.2 slot?
The drive uses the M.2 2280 form factor, which is 22 mm wide and 80 mm long. Most modern ultrabooks and desktops accept this size, but verify your motherboard or chassis clearance before buying.
Does the drive require a separate heatsink?
Active power draw is 2.99 W and idle draw is 0.68 W, which is low for a PCIe 3.0 x4 NVMe SSD. Many motherboards include integrated thermal pads; if yours does not, a thin aftermarket pad is inexpensive and easy to add.
How much real-world data can I write before wear becomes a concern?
The endurance rating is 100 TBW (terabytes written). At 50 GB of writes per day, that equals roughly five years of service life.
Επίσης σε αυτό το ράφι
Οι πελάτες σύγκριναν και αυτά
Ίδιο ράφι, ίδιο ταμείο — οκτώ νομίσματα και κλείδωμα ισοτιμίας 30 λεπτών.



