HP
HP S650 2.5" SATA Internal SSD 240GB 345M8AA#ABA
- Internal Solid Stat…
- 2.5"
45,99 $
0.00059018BTC
Διαθέσιμο
HP
HP S650 1.92TB 2.5" SATA III Internal SSD 345N1AA#ABA
2.5-inch SATA SSD with 1.92TB capacity, 3D NAND, up to 560MB/s read and 500MB/s write for faster boots and file transfers
- Device TypeInternal Solid State Drive (SSD)
- Form Factor2.5"
- Capacity1.92TB
- Memory Components3D NAND
- InterfaceSATA III
- Max Sequential ReadUp to 560 MBps
Options 1.92TB
- 1.92TB
- 240GB
- 92 TB capacity stores large media libraries and project files
- 560 MB/s sequential read speeds up boot and file loading
- 500 MB/s sequential write speeds accelerate data transfers
- 3D NAND with LDPC ECC maintains data integrity under heavy use
- 5 inch SATA III form factor fits most laptops and desktops
Capacity and interface
The HP S650 is a 1.92 TB internal solid-state drive with a 2.5 inch form factor and a SATA III 6 Gb/s interface. It uses 3D NAND flash and a high-performance controller to deliver sequential reads up to 560 MB/s and writes up to 500 MB/s. The drive suits desktops and laptops needing a straightforward storage upgrade.
Sustained workload behaviour
LDPC error correction and an intelligent SLC cache help maintain data integrity and consistent throughput during extended transfers. A mean time between failures of 1,000,000 hours and vibration resistance rated at 3G indicate reliability under continuous operation. The SATA III link keeps latency low for mixed read and write tasks.
Thermals noise and power
With no moving parts the SSD runs silently and produces minimal heat in typical desktop or laptop use. Power draw stays modest compared with mechanical drives, helping battery life in portable systems. The 2.5 inch metal housing aids passive heat dissipation without requiring active cooling.
Βασικά χαρακτηριστικά
- 92 TB capacity stores large media libraries and project files
- 560 MB/s sequential read speeds up boot and file loading
- 500 MB/s sequential write speeds accelerate data transfers
- 3D NAND with LDPC ECC maintains data integrity under heavy use
- 5 inch SATA III form factor fits most laptops and desktops
Προδιαγραφές
| Brand | HP |
|---|---|
| Series | S650 |
| Model | 345N1AA#ABA |
| Device Type | Internal Solid State Drive (SSD) |
| Form Factor | 2.5" |
| Capacity | 1.92TB |
| Memory Components | 3D NAND |
| Interface | SATA III |
| Max Sequential Read | Up to 560 MBps |
| Max Sequential Write | Up to 500 MBps |
| MTBF | 1,000,000 hours |
| Max Vibration Resistance | 3G |
Άλλες εκδόσεις αυτού του μοντέλου
1 ακόμη στην ίδια σειρά
Ίδια οικογένεια, διαφορετική μνήμη, ψύκτρα ή συχνότητα — συγκρίνετε πριν αποφασίσετε.
Ερωτήσεις για αυτό το προϊόν
Does the HP S650 1.92TB SSD run hot or draw much power during continuous daily use?
The SATA III interface and 3D NAND design keep power draw low and heat minimal, so the drive stays cool during all-day workloads without needing extra cooling.
Will the 2.5-inch SATA III connection fit my current laptop or desktop without extra parts?
Yes, the classic 2.5" form factor and standard SATA III interface connect directly to any mainstream laptop or desktop drive bay or caddy.
Can I use this 1.92TB SATA III drive alongside an older mechanical hard drive in the same system?
Absolutely — the SATA III interface works with existing SATA controllers, letting you run the HP S650 as a fast boot drive while keeping an older HDD for bulk storage.
Επίσης σε αυτό το ράφι
Οι πελάτες σύγκριναν και αυτά
Ίδιο ράφι, ίδιο ταμείο — οκτώ νομίσματα και κλείδωμα ισοτιμίας 30 λεπτών.
