Δεχόμαστε κρυπτονομίσματα — έτσι ώστε αυτά που κατέχετε να μπορούν να αγοράσουν πραγματικό εξοπλισμό.Πληρώστε σε κρυπτονομίσματα, ξοδέψτε τα σε πραγματικό εξοπλισμό. Δωρεάν ασφαλισμένη αποστολή παγκοσμίως άνω των 399 $. Ουδέτερες κούτες αποστολής, χωρίς σήμανση, από τη Γερμανία.Δωρεάν ασφαλισμένη αποστολή άνω των 399 $. Η ισοτιμία σας κλειδώνει για 30 λεπτά μόλις ανοίξει το ταμείο.Κλείδωμα ισοτιμίας 30 λεπτών. Κάθε προϊόν είναι σφραγισμένο, ελεγμένο ως προς τον σειριακό αριθμό του, και καλύπτεται από εγγύηση 24 μηνών.Σφραγισμένο, με εγγύηση 24 μηνών.

Παρακολουθούμενα είδη Σύνδεση

HPE

HPE 5400R 1100W PoE+ zl2 Power Supply J9829A

SKU CH-TBY4-3TQVA

Delivers 1.10 kW to HPE 5400R switches with PoE+ support over 120 V AC or 230 V DC input

  • TypeProprietary Power Supply
  • 1100 W output powers PoE+ devices across the chassis
  • Dual 120 V AC and 230 V DC input fits varied facility power
  • Proprietary zl2 form factor slots directly into 5400R switches
  • Hot-swap design keeps the network running during replacement

HPE 5400R 1100W PoE+ zl2 Power Supply

The HPE 5400R 1100W PoE+ zl2 Power Supply is a proprietary unit built for HPE 5400R zl2 switch chassis. It delivers 1.10 kW of output power to run the switch and attached PoE+ devices. Network engineers and data-centre operators use it to replace or add redundant power in compatible cabinets.

Practical limits of the AC input range

The supply accepts 120 V AC or 230 V DC input, so it cannot operate from other voltages without a separate converter. Maximum output is fixed at 1.10 kW, which caps the total PoE+ budget and switch load. Installations needing higher wattage or different input standards must select another power supply model.

Βασικά χαρακτηριστικά

  • 1100 W output powers PoE+ devices across the chassis
  • Dual 120 V AC and 230 V DC input fits varied facility power
  • Proprietary zl2 form factor slots directly into 5400R switches
  • Hot-swap design keeps the network running during replacement

Προδιαγραφές

TypeProprietary Power Supply

Ερωτήσεις για αυτό το προϊόν

How do I decide between the 1100 W PoE+ zl2 unit and a lower-wattage supply for my 5400R chassis?

Choose the 1.10 kW PoE+ zl2 supply when the total PoE load plus switch power draw approaches 1100 W; a lower-wattage unit will trip its protection if the combined demand exceeds its rating.

What does the 1100 W rating deliver in a live 5400R switch?

The 1.10 kW output powers the switch fabric and provides up to 30 W per port on PoE+ line cards simultaneously, so long as the aggregate draw stays within the 1100 W limit.

Επίσης σε αυτό το ράφι

Οι πελάτες σύγκριναν και αυτά

Ίδιο ράφι, ίδιο ταμείο — οκτώ νομίσματα και κλείδωμα ισοτιμίας 30 λεπτών.