Rectangular silver blade server with front drive bays and connector edge

HPE

HPE BL460c G10 Blade Server 2x Xeon Gold 6148 64GB DDR4 2x 4TB SATA

SKU CH-D6WQ-MVK28

Blade server with two 2.4 GHz Xeon Gold 6148 CPUs, 64 GB DDR4, dual 4 TB SATA drives and iLO Advanced remote management

TypeBlade
CPU TypeIntel Xeon
CPU Speed2.4 GHz
# of Processors Installed2
MAX Processors2
Installed Memory Size64GB

Dual Xeon Gold 6148 CPUs deliver 20 cores at 2.4 GHz for demanding workloads
64 GB DDR4 ECC memory supports up to 128 GB for large datasets
2× 4 TB SATA drives provide 8 TB total storage on Smart Array P204i-b controller
Integrated iLO Advanced enables remote management and firmware updates from anywhere
Half-height blade form factor fits dense HPE c-Class enclosures for scale-out deployments

5.992,99 $

0.07645485 BTC με τη σημερινή ισοτιμία

Διαθέσιμο · αποστολή σήμερα

Το ταμείο κλειδώνει την ισοτιμία σας για 30 λεπτά.

Παράδοση προς Ηνωμένες Πολιτείες εκτίμηση

UPS Worldwide Expedited 3–6 εργάσιμες ημέρες Δωρεάν
DHL Express Worldwide 2–3 εργάσιμες ημέρες 74,90 $

Οι εισαγωγικοί δασμοί επιβάλλονται κατά την άφιξη από τη χώρα σας.

Αποστολή αλλού

Blade server for dense compute

The HPE BL460c Gen10 fits a standard c-Class enclosure and delivers two Xeon Gold 6148 processors at 2.4 GHz. Each CPU provides ten cores and 27.5 MB cache for a total of twenty cores. Installed memory is 64 GB DDR4 ECC registered with headroom to 128 GB.

Thermals and power in the enclosure

Shared enclosure fans cool the blade so acoustics depend on the chassis configuration rather than the server itself. Power draw scales with the dual-processor workload and the two installed 2.5-inch SATA drives. The Smart Array P204i-b SR controller manages RAID without a separate add-in card.

Build and daily connectivity

The half-height blade uses a 22 by 22 by 10 inch form factor weighing 20 units and supports up to two 2.5-inch drives. Front-accessible bays simplify drive swaps while the FlexFabric 20 Gb two-port 650FLB adapter handles networking. Integrated iLO Advanced gives remote console and firmware control without a local display.

Βασικά χαρακτηριστικά

Dual Xeon Gold 6148 CPUs deliver 20 cores at 2.4 GHz for demanding workloads
64 GB DDR4 ECC memory supports up to 128 GB for large datasets
2× 4 TB SATA drives provide 8 TB total storage on Smart Array P204i-b controller
Integrated iLO Advanced enables remote management and firmware updates from anywhere
Half-height blade form factor fits dense HPE c-Class enclosures for scale-out deployments

Προδιαγραφές

Brand	HP
Series	Proliant BL
Model	Blade
Type	Blade
CPU Type	Intel Xeon
CPU Speed	2.4 GHz
# of Processors Installed	2
MAX Processors	2
Installed Memory Size	64GB
Memory Type	DDR4 SDRAM
Max Memory Capacity	128GB
Hard Drive (Installed)	8,00
Storage Controller	HP Smart Array P204i-b SR Controller
HDD Interface	SATA
GPU Type	Integrated Graphics
Remote Management	Integrated Lights-Out (iLO) Advanced
Dimensions	22 x 22x 10 in
Weight	20

Ερωτήσεις για αυτό το προϊόν

How do I install the HPE BL460c G10 blade into a c-Class enclosure and which step is commonly missed?

Slide the blade into an empty bay until the latch clicks, then press the power button; the step often missed is confirming the iLO Advanced licence activates so remote management works immediately.

Which components will need replacement first during the server's service life?

The two 4 TB SATA 2.5" hard drives are mechanical and will likely need replacement before the Xeon Gold 6148 CPUs, DDR4 memory or Smart Array P204i-b SR controller.

What thermal or power limit appears first when both Xeon Gold 6148 processors run at 2.4 GHz under sustained load?

The blade's 10‑core CPUs with 27.5 MB cache each hit the enclosure's shared cooling capacity before the 128 GB memory ceiling or dual‑processor maximum is reached.

Επίσης σε αυτό το ράφι