Silver rack server front with eight 2.5 inch drive bays

HPE

HPE DL360 Gen10 8SFF 2x Xeon Bronze 3104 384GB DDR4 No Drive rack server

SKU CH-5J02-6TAX4

Rack server with dual 1.7 GHz Xeon 3104 CPUs, 384 GB DDR4 ECC memory, Smart Array P408 SAS controller and eight 2.5-inch drive bays

TypeRack
CPU TypeIntel Xeon
CPU Speed1.7GHz
# of Processors Installed2
MAX Processors2
Installed Memory Size384GB

Dual Xeon Bronze 3104 processors provide 1.7GHz base performance for balanced workloads
384GB DDR4 ECC registered memory supports large virtualisation environments
HPE Smart Array P408 SAS controller enables flexible RAID storage configurations
Integrated iLO Advanced remote management allows out-of-band server control
8SFF 2.5-inch drive bays offer high-density storage capacity in 1U form factor

1.761,99 $

0.02228928 BTC με τη σημερινή ισοτιμία

Διαθέσιμο · αποστολή σήμερα

Το ταμείο κλειδώνει την ισοτιμία σας για 30 λεπτά.

Παράδοση προς Ηνωμένες Πολιτείες εκτίμηση

UPS Worldwide Expedited 3–6 εργάσιμες ημέρες Δωρεάν
DHL Express Worldwide 2–3 εργάσιμες ημέρες 74,90 $

Οι εισαγωγικοί δασμοί επιβάλλονται κατά την άφιξη από τη χώρα σας.

Αποστολή αλλού

HPE DL360 Gen10 8SFF Server

The HPE DL360 Gen10 is a 1U rack server built for data-centre workloads. It ships with two Intel Xeon Bronze 3104 processors running at 1.7GHz and 384GB of DDR4 ECC registered memory. Eight 2.5-inch drive bays and an HPE Smart Array P408 SAS controller provide flexible storage options. Integrated graphics and HPE iLO Advanced remote management come standard.

Compute-focused buyers, not storage-ready

This configuration suits environments that need high memory capacity and dual-socket compute in a compact chassis. Virtualisation hosts, database nodes and application servers benefit from the 384GB installed RAM and twenty-four total cores. Buyers who need drives installed, a different drive-count layout, or discrete GPU acceleration should evaluate other platforms because this unit arrives without storage and relies on integrated graphics only.

384GB DDR4 ECC registered memory

The installed memory is the decisive specification for compatibility and capacity planning. All 384GB are DDR4 ECC registered modules, matching the server's registered DIMM requirement. The platform supports a maximum of 3TB when fully populated, so the current 384GB leaves headroom for future expansion. Verify that any additional modules are DDR4 ECC registered to maintain stability.

Βασικά χαρακτηριστικά

Dual Xeon Bronze 3104 processors provide 1.7GHz base performance for balanced workloads
384GB DDR4 ECC registered memory supports large virtualisation environments
HPE Smart Array P408 SAS controller enables flexible RAID storage configurations
Integrated iLO Advanced remote management allows out-of-band server control
8SFF 2.5-inch drive bays offer high-density storage capacity in 1U form factor

Προδιαγραφές

Brand	HP
Series	ProLiant
Model	Rack Mount
Type	Rack
CPU Type	Intel Xeon
CPU Speed	1.7GHz
# of Processors Installed	2
MAX Processors	2
Installed Memory Size	384GB
Memory Type	DDR4
Max Memory Capacity	3TB
Hard Drive (Installed)	20,00
Storage Controller	HPE Smart Array P408 SAS Controller
HDD Interface	SATA
GPU Type	Integrated Graphics
Remote Management	HPE iLO Advanced
Dimensions	36 x 24 x 10 in
Weight	40

Ερωτήσεις για αυτό το προϊόν

What rack depth and height does the 36 x 24 x 10 in chassis require?

The chassis is 36 in deep, 24 in wide and 10 in high, so the rack must provide at least 36 in of usable depth and 10 in of vertical clearance for the 1U form factor.

Which cables and controller ports are used when installing drives in the eight 2.5 in bays?

Connect each drive to the Smart Array P408 SAS controller using SATA cables; the controller manages RAID for the eight front-access bays.

When should the two 500 W power supplies or the system fans be replaced?

Replace a power supply if its LED shows a fault or the iLO log reports a failure; replace fans when iLO alerts indicate degraded airflow or bearing noise.

Επίσης σε αυτό το ράφι