Silver 2U rack server front with twelve 3.5 inch drive bays

HPE

HPE DL380 Gen9 12LFF 2x Xeon E5-2640 v3 32GB DDR4 rack server

SKU CH-5MQT-2AKZN

A 2U rack server with twelve 3.5-inch drive bays, dual 2.6 GHz Xeon processors and 32 GB DDR4 memory

TypeRack
CPU TypeIntel Xeon
CPU Speed2.6GHz
# of Processors Installed2
MAX Processors2
Installed Memory Size32GB

Dual Xeon E5-2640 v3 CPUs deliver 16 total cores for parallel workloads
32 GB DDR4 ECC memory supports large datasets with error correction
12 LFF drive bays accept 3.5-inch SATA drives for high-capacity storage
HP Smart Array P440ar SAS controller provides hardware RAID for data protection
HPE iLO Advanced enables remote management and firmware updates from anywhere

1.171,99 $

0.01511757 BTC με τη σημερινή ισοτιμία

Διαθέσιμο · αποστολή σήμερα

Το ταμείο κλειδώνει την ισοτιμία σας για 30 λεπτά.

Παράδοση προς Ηνωμένες Πολιτείες εκτίμηση

UPS Worldwide Expedited 3–6 εργάσιμες ημέρες Δωρεάν
DHL Express Worldwide 2–3 εργάσιμες ημέρες 74,90 $

Οι εισαγωγικοί δασμοί επιβάλλονται κατά την άφιξη από τη χώρα σας.

Αποστολή αλλού

DL380 Gen9 12-bay server

The HPE ProLiant DL380 Gen9 is a 2U rack server built around two Intel Xeon E5-2640 v3 processors running at 2.6GHz. It ships with 32GB of DDR4 ECC registered memory and supports up to 3TB across its DIMM slots. The chassis provides twelve 3.5-inch drive bays wired to an HP Smart Array P440ar SAS controller with an expander. Dual 800W hot-plug power supplies and HPE iLO remote management are included.

Suits dense storage workloads

This platform fits organisations that need large-capacity SATA or SAS storage in a compact rack footprint, such as backup repositories, archival stores or software-defined storage nodes. The twelve-bay layout and integrated 10GbE networking support high-throughput data ingest. Buyers who require direct-attached PCIe flash or U.2/U.3 devices should look elsewhere, as the backplane and controller are designed for traditional spinning media and SAS SSDs.

Twelve 3.5-inch drive bays

The single specification that determines fit is the twelve-bay 3.5-inch LFF chassis. It dictates the maximum raw capacity, the physical drive form factor and the airflow path for the installed 800W power supplies. If the deployment calls for a different bay count, 2.5-inch drives or a shorter chassis depth, this server will not meet the requirement.

Βασικά χαρακτηριστικά

Dual Xeon E5-2640 v3 CPUs deliver 16 total cores for parallel workloads
32 GB DDR4 ECC memory supports large datasets with error correction
12 LFF drive bays accept 3.5-inch SATA drives for high-capacity storage
HP Smart Array P440ar SAS controller provides hardware RAID for data protection
HPE iLO Advanced enables remote management and firmware updates from anywhere

Προδιαγραφές

Brand	HP
Series	ProLiant
Model	Rack Mount
Type	Rack
CPU Type	Intel Xeon
CPU Speed	2.6GHz
# of Processors Installed	2
MAX Processors	2
Installed Memory Size	32GB
Memory Type	DDR4
Max Memory Capacity	3TB
Hard Drive (Installed)	20,00
Storage Controller	HP Smart Array P440ar And Sas Expander
HDD Interface	SATA
GPU Type	Integrated Graphics
Remote Management	HPE iLO Advanced
Dimensions	36 x 24 x 10 in
Weight	40

Ερωτήσεις για αυτό το προϊόν

What rack depth and width does the 36 x 24 x 10 inch chassis require?

The chassis is 36 inches deep, 24 inches wide and 10 inches high, so the rack must provide at least 36 inches of usable depth and a 24-inch wide mounting opening.

How are the two 800W flex-slot power supplies installed, and what step is often missed?

Slide each supply into the rear bays until the latch clicks, then seat both IEC cables; the step often missed is engaging the redundant power cable on the second supply.

When will the DDR4 ECC registered memory need to be expanded or replaced?

The system ships with 32 GB in two 16 GB modules and supports up to 3 TB; add matched DDR4 ECC registered DIMMs when workloads exceed the installed capacity.

Επίσης σε αυτό το ράφι