Silver 2U rack server with eight front drive bays

HPE

HPE DL380 Gen9 8SFF 2x Xeon E5-2620 v4 256GB DDR4 rack server

SKU CH-BBHR-9NYBX

Dual Xeon E5-2620 v4 processors and 256GB DDR4 memory in an 8-bay rack chassis for virtualisation and database workloads

TypeRack
CPU TypeIntel Xeon
CPU Speed2.1GHz
# of Processors Installed2
MAX Processors2
Installed Memory Size256GB

Dual Xeon E5-2620 v4 CPUs at 2.1GHz for multi-threaded performance
256GB DDR4 ECC memory supports large virtualised workloads
P440 SAS controller manages up to 8 drive bays
iLO Advanced remote management enables out-of-band control
Dual 500W power supplies provide redundancy

1.234,99 $

0.01589884 BTC με τη σημερινή ισοτιμία

Διαθέσιμο · αποστολή σήμερα

Το ταμείο κλειδώνει την ισοτιμία σας για 30 λεπτά.

Παράδοση προς Ηνωμένες Πολιτείες εκτίμηση

UPS Worldwide Expedited 3–6 εργάσιμες ημέρες Δωρεάν
DHL Express Worldwide 2–3 εργάσιμες ημέρες 74,90 $

Οι εισαγωγικοί δασμοί επιβάλλονται κατά την άφιξη από τη χώρα σας.

Αποστολή αλλού

HPE DL380 Gen9 8SFF dual Xeon server

The HPE DL380 Gen9 8SFF chassis arrives with two Xeon E5-2620 v4 processors at 2.1GHz and 256GB of DDR4 ECC registered memory pre-installed. It targets virtualisation hosts, database nodes and compute clusters that need dense 2.5-inch drive capacity in a 2U rack footprint. Buyers who need GPU acceleration or more than two sockets should look elsewhere.

Installation notes and common pitfalls

The unit ships with dual 500W Flex Slot power supplies, a P440 PCIe SAS controller and an Intel I350/X540 network card providing two 10GbE and two 1GbE ports. Drive caddies for the eight SFF bays are not included and must be ordered separately. Firmware and BIOS are updated to the latest stable release before dispatch.

Pre-order compatibility checks

Verify that your rack can accept a 36 x 24 x 10 inch 2U enclosure and that the facility provides adequate cooling for a 40-pound chassis. Confirm the SAS backplane matches your intended drive protocol and that iLO Advanced licensing meets your remote-management requirements. Rail kits are available on request if not already in your rack inventory.

Βασικά χαρακτηριστικά

Dual Xeon E5-2620 v4 CPUs at 2.1GHz for multi-threaded performance
256GB DDR4 ECC memory supports large virtualised workloads
P440 SAS controller manages up to 8 drive bays
iLO Advanced remote management enables out-of-band control
Dual 500W power supplies provide redundancy

Προδιαγραφές

Brand	HP
Series	ProLiant
Model	Rack Mount
Type	Rack
CPU Type	Intel Xeon
CPU Speed	2.1GHz
# of Processors Installed	2
MAX Processors	2
Installed Memory Size	256GB
Memory Type	DDR4
Max Memory Capacity	3TB
Hard Drive (Installed)	7,20
Storage Controller	HPE Smart Array P440 SAS Controller
HDD Interface	SAS
GPU Type	Integrated Graphics
Remote Management	HPE iLO Advanced
Dimensions	36 x 24 x 10 in
Weight	40

Ερωτήσεις για αυτό το προϊόν

How do I verify the P440 SAS controller sees all installed drives after setup?

After power-on, open the P440 BIOS utility or HPE iLO Advanced to confirm the controller detects every SAS drive in the 8SFF bays and reports healthy RAID arrays.

What components ship with the server and what must I supply?

The unit includes 2x Xeon E5-2620 v4 CPUs, 256GB DDR4 ECC Registered memory, P440 PCIe SAS controller, Intel I350/X540 2x 10GbE + 2x 1GbE NIC, 2x 500W Flex Slot power supplies and rails on request; 2.5" SAS drives are not included.

Should I choose the 256GB DDR4 configuration or add more memory up to the 3TB limit?

Start with the installed 256GB DDR4 ECC Registered if current workloads fit; add registered DDR4 modules later — up to the 3TB maximum — when virtualization or database demand grows.

Επίσης σε αυτό το ράφι