IBM
IBM MBF2300RC 300GB 10000RPM 64MB 2.5" SAS internal hard drive
A 300 GB 10,000 RPM SAS drive with 64 MB cache and a 2.5 inch form factor, supplied new with an IBM System X caddy
- 300 GB capacity stores large datasets
- 10000 RPM spindle delivers fast data access
- 64 MB cache buffers bursts for smooth throughput
- SAS 6 Gb/s interface connects to compatible controllers
- Includes IBM System X caddy for direct 2.5 inch bay installation
300 GB 10 000 RPM SAS drive
This 300 GB SAS hard drive spins at 10 000 RPM and provides a 64 MB cache. It uses a 2.5 inch form factor with a 6 Gb/s SAS interface. The unit ships new and includes an IBM System x caddy tray for direct installation in compatible bays.
Enterprise server and storage arrays
The drive suits IBM System x servers and external storage enclosures that accept 2.5 inch SAS drives with a 6 Gb/s interface. Buyers needing a different interface, a lower rotational speed, or a 3.5 inch form factor should look elsewhere.
6 Gb/s SAS interface
The single specification that decides fit is the 6 Gb/s SAS interface. The host backplane or controller must support this exact SAS link speed and the 2.5 inch drive connector for the drive to function.
Βασικά χαρακτηριστικά
- 300 GB capacity stores large datasets
- 10000 RPM spindle delivers fast data access
- 64 MB cache buffers bursts for smooth throughput
- SAS 6 Gb/s interface connects to compatible controllers
- Includes IBM System X caddy for direct 2.5 inch bay installation
Προδιαγραφές
Δεν έχουν δημοσιευτεί ακόμη προδιαγραφές για αυτό το προϊόν.
Ερωτήσεις για αυτό το προϊόν
Do I need a 2.5" SAS 6Gb/s backplane or controller to install this 300GB 10000RPM drive?
Yes, the MBF2300RC connects through a 2.5" SAS 6Gb/s interface, so the host must provide a compatible SAS backplane, HBA or RAID controller with a free 2.5" drive bay.
Will this 6Gb/s SAS drive negotiate down to 3Gb/s on my older IBM System x server?
SAS links auto-negotiate, so the 6Gb/s MBF2300RC will run at 3Gb/s when connected to a 3Gb/s backplane or controller without any jumper changes.
How can I confirm the 64MB cache and 10000RPM spindle are active after installation?
Check the drive’s SMART data or the RAID controller BIOS — both will report 64MB buffer, 10000RPM rotation and the negotiated 6Gb/s link speed.
Επίσης σε αυτό το ράφι
Οι πελάτες σύγκριναν και αυτά
Ίδιο ράφι, ίδιο ταμείο — οκτώ νομίσματα και κλείδωμα ισοτιμίας 30 λεπτών.



