Δεχόμαστε κρυπτονομίσματα — έτσι ώστε αυτά που κατέχετε να μπορούν να αγοράσουν πραγματικό εξοπλισμό.Πληρώστε σε κρυπτονομίσματα, ξοδέψτε τα σε πραγματικό εξοπλισμό. Δωρεάν ασφαλισμένη αποστολή παγκοσμίως άνω των 399 $. Ουδέτερες κούτες αποστολής, χωρίς σήμανση, από τη Γερμανία.Δωρεάν ασφαλισμένη αποστολή άνω των 399 $. Η ισοτιμία σας κλειδώνει για 30 λεπτά μόλις ανοίξει το ταμείο.Κλείδωμα ισοτιμίας 30 λεπτών. Κάθε προϊόν είναι σφραγισμένο, ελεγμένο ως προς τον σειριακό αριθμό του, και καλύπτεται από εγγύηση 24 μηνών.Σφραγισμένο, με εγγύηση 24 μηνών.

Παρακολουθούμενα είδη Σύνδεση
Silver metal tray converting a 2.5 inch drive to a 3.5 inch bay

ICY DOCK

ICY DOCK MB982SP-1S 2.5" to 3.5" SATA HDD SSD converter hdd accessory

SKU CH-Y3NZ-TPZ1S MPN MB982SP-1S

Converts a 2.5" SATA drive to fit a 3.5" bay with tool-less installation and full metal construction

  • ColorSilver
  • Conversion Tray1 x 2.5" Drive to 3.5" Bay
  • Mobile Rack Drives Support1 x 2.5" Drive to 3.5" Bay
  • Mobile Rack InterfaceSATA I/II/III/SAS
  • Protection CaseSingle Drive
  • SpecificationsColor: Silver Compatible Drive Type: 2.5" SATA 1.5 / 3 / 6 G

Model Enterprise

Option 1 x 3.5in

  • Converts 2.5" SATA drives to fit 3.5" bays
  • Supports 7 to 15mm drive heights for broad compatibility
  • Maintains full SATA 6Gbps speed with no reduction
  • Tool-less installation allows quick drive swaps
  • Sturdy all-metal construction with anti-vibration design

Enterprise 2.5" to 3.5" SATA Converter

The ICY DOCK MB982SP-1S converts a single 2.5" SATA HDD or SSD into a standard 3.5" drive bay form factor. It accepts drives from 7 mm up to 15 mm in height and maintains full SATA 6 Gb/s transfer rates without speed reduction. The all-metal chassis includes airflow vents for heat dissipation and an anti-vibration design. Tool-less installation allows the drive to be mounted or removed quickly.

Builders with 2.5" SATA drives and 3.5" bays

This converter suits anyone fitting a 2.5" SATA hard drive or SSD into a desktop, server or workstation that only offers 3.5" SATA bays. It also supports SAS drives through the same SATA interface. Users who need to install multiple drives in one bay or who require a hot-swap tray with a locking door should look at a different solution.

15 mm maximum drive height

The tray accommodates 2.5" SATA drives up to 15 mm thick, covering most enterprise and consumer SSDs as well as standard laptop hard drives. Drives exceeding this height will not fit inside the enclosure.

Βασικά χαρακτηριστικά

  • Converts 2.5" SATA drives to fit 3.5" bays
  • Supports 7 to 15mm drive heights for broad compatibility
  • Maintains full SATA 6Gbps speed with no reduction
  • Tool-less installation allows quick drive swaps
  • Sturdy all-metal construction with anti-vibration design

Προδιαγραφές

BrandICY DOCK
ModelMB982SP-1S
ColorSilver
Conversion Tray1 x 2.5" Drive to 3.5" Bay
Mobile Rack Drives Support1 x 2.5" Drive to 3.5" Bay
Mobile Rack InterfaceSATA I/II/III/SAS
Protection CaseSingle Drive
SpecificationsColor: Silver
Compatible Drive Type: 2.5" SATA 1.5 / 3 / 6 Gb/s HDD / SSD (Up to 15mm)
Device Interface: SATA
Device Fit: 3.5" SATA Drive Bay
Transfer Rate: Up to 6 Gb / sec. (depending on hard drive speed)
Material: SECC
Dimension (L x W x H): 5.77" x 4.0" x 1.0"
Weight: 0.72 lb.
FeaturesConverts your 2.5" SATA HDD or SSD to a 3.5" SATA hard drive, for 3.5" SATA drive bay usage
Full Metal and Heavy Duty with Easy Access to Drives
Airflow Vents for Heat Dissipation with Anti-vibration Design
Universal Mounting Holes for Most Common PC Cases
Compatible with Most 3.5" HDD Backplanes and Hot Swap Devices
Compatible with Mac Pro
Screw-less Design For Quick & Easy Installation
Perfect For System Integrators and IT Professionals
Compatible with 15mm height drives
Βάρος αποστολής0.36 kg
Διαστάσεις συσκευασίας163 × 112 × 37 mm

Άλλες εκδόσεις αυτού του μοντέλου

3 ακόμη στην ίδια σειρά

Ίδια οικογένεια, διαφορετική μνήμη, ψύκτρα ή συχνότητα — συγκρίνετε πριν αποφασίσετε.

Ερωτήσεις για αυτό το προϊόν

Does the MB982SP-1S need any rails or screws to fit a standard 3.5" SATA bay?

The converter slides directly into any 3.5" SATA drive bay; its full-metal frame aligns with the bay screw holes so the chassis screws hold it without extra rails.

Will a 2.5" SATA drive running at 1.5 Gb/s or 3 Gb/s work reliably in this 6 Gb/s converter?

The tray passes through SATA I, II and III signals unchanged, so a 1.5 or 3 Gb/s drive operates at its native speed with no bottleneck.

After installing the drive, how can I confirm the converter is not limiting the 6 Gb/s link?

Check the negotiated link speed in your BIOS or OS disk utility; it should report 6 Gb/s when a 6 Gb/s drive is fitted, proving the converter adds no reduction.

Επίσης σε αυτό το ράφι

Οι πελάτες σύγκριναν και αυτά

Ίδιο ράφι, ίδιο ταμείο — οκτώ νομίσματα και κλείδωμα ισοτιμίας 30 λεπτών.