Δεχόμαστε κρυπτονομίσματα — έτσι ώστε αυτά που κατέχετε να μπορούν να αγοράσουν πραγματικό εξοπλισμό.Πληρώστε σε κρυπτονομίσματα, ξοδέψτε τα σε πραγματικό εξοπλισμό. Δωρεάν ασφαλισμένη αποστολή παγκοσμίως άνω των 399 $. Ουδέτερες κούτες αποστολής, χωρίς σήμανση, από τη Γερμανία.Δωρεάν ασφαλισμένη αποστολή άνω των 399 $. Η ισοτιμία σας κλειδώνει για 30 λεπτά μόλις ανοίξει το ταμείο.Κλείδωμα ισοτιμίας 30 λεπτών. Κάθε προϊόν είναι σφραγισμένο, ελεγμένο ως προς τον σειριακό αριθμό του, και καλύπτεται από εγγύηση 24 μηνών.Σφραγισμένο, με εγγύηση 24 μηνών.

Παρακολουθούμενα είδη Σύνδεση

Intel

Intel SSD DC S3710 200GB SATA 2.5in internal SSD

SKU CH-NS00-P40D2

A 200 GB SATA internal SSD built for data-centre workloads with MLC flash

  • Enterprise-grade endurance with MLC NAND technology
  • 200GB capacity for mixed read-write workloads
  • 6G SATA interface for broad server compatibility
  • 5-inch form factor fits standard drive bays
  • HP firmware validated for ProLiant integration

Intel SSD DC S3710 200GB SATA

This Intel SSD DC S3710 is a 200GB internal solid-state drive using a SATA interface in a 2.5in form factor. It employs MLC flash technology and carries HPE firmware HPG2 in a sealed package without a tray. The drive is identified by part numbers SSDSC2BA200G4P and 804638-001.

Suited for SATA 2.5in server bays

This drive suits administrators refreshing compatible HPE or Intel SATA 2.5in bays that require MLC endurance and vendor-specific firmware. Builders whose platforms demand a different interface, a larger capacity, or a supplied mounting tray should look elsewhere.

200GB capacity

The 200GB capacity is the key specification that determines fit for a given workload or replacement scenario. Verify that this exact capacity matches the array configuration or the slot requirement before purchase.

Βασικά χαρακτηριστικά

  • Enterprise-grade endurance with MLC NAND technology
  • 200GB capacity for mixed read-write workloads
  • 6G SATA interface for broad server compatibility
  • 5-inch form factor fits standard drive bays
  • HP firmware validated for ProLiant integration

Προδιαγραφές

Δεν έχουν δημοσιευτεί ακόμη προδιαγραφές για αυτό το προϊόν.

Ερωτήσεις για αυτό το προϊόν

What speed does the SATA 6G interface cap this drive at in practice?

The SATA 6G link tops out at 6 Gb/s, so sequential reads and writes cannot exceed that bandwidth ceiling.

What physical space and mounting does the 2.5in form factor require?

It fits a standard 2.5in drive bay and uses the usual SATA data and power connectors; no tray is included.

How is the drive installed and which step is often missed?

Connect the SATA data and power cables, secure the drive in the bay, then verify the system sees the HPG2 firmware before use.

Επίσης σε αυτό το ράφι

Οι πελάτες σύγκριναν και αυτά

Ίδιο ράφι, ίδιο ταμείο — οκτώ νομίσματα και κλείδωμα ισοτιμίας 30 λεπτών.