Δεχόμαστε κρυπτονομίσματα — έτσι ώστε αυτά που κατέχετε να μπορούν να αγοράσουν πραγματικό εξοπλισμό.Πληρώστε σε κρυπτονομίσματα, ξοδέψτε τα σε πραγματικό εξοπλισμό. Δωρεάν ασφαλισμένη αποστολή παγκοσμίως άνω των 399 $. Ουδέτερες κούτες αποστολής, χωρίς σήμανση, από τη Γερμανία.Δωρεάν ασφαλισμένη αποστολή άνω των 399 $. Η ισοτιμία σας κλειδώνει για 30 λεπτά μόλις ανοίξει το ταμείο.Κλείδωμα ισοτιμίας 30 λεπτών. Κάθε προϊόν είναι σφραγισμένο, ελεγμένο ως προς τον σειριακό αριθμό του, και καλύπτεται από εγγύηση 24 μηνών.Σφραγισμένο, με εγγύηση 24 μηνών.

Παρακολουθούμενα είδη Σύνδεση

Intel

Intel SSDPE2MX012T701 1.2TB 2.5" PCIe 3.0 x4 MLC enterprise SSD

SKU CH-YQ5A-F1DP3 MPN SSDPE2MX012T701

2.5-inch PCIe 3.0 x4 enterprise SSD with 1.2TB MLC storage delivering 1700MBps reads and 1300MBps writes

  • Form Factor2.5"
  • Capacity1.2TB
  • Memory ComponentsMLC
  • InterfacePCI-Express 3.0 x4
  • Max Sequential ReadUp to 1700 MBps
  • Max Sequential WriteUp to 1300 MBps

Options 1.2TB 2.5"

  • 2 TB capacity for high-density server storage
  • PCIe 3.0 x4 interface delivers up to 1700 MB/s sequential read speed
  • MLC memory sustains up to 320,000 random read IOPS
  • 2 million hour MTBF supports continuous enterprise workloads
  • 5 inch form factor fits standard drive bays

1.2 TB PCIe 3.0 x4 MLC enterprise SSD

The Intel SSDPE2MX012T701 is a 2.5 inch enterprise solid-state drive with 1.2 TB capacity and a PCI-Express 3.0 x4 interface. It uses MLC memory components and is built for servers that need consistent performance in read-heavy workloads.

Sustained write behaviour

Sequential write speed reaches up to 1300 MBps while random write performance delivers up to 26,000 IOPS at 4 KB. Write latency is rated at 20 µs and active write power draws 11 W, allowing steady throughput without the sharp drops seen in burst-only drives.

PCIe 3.0 x4 interface limits

The four-lane PCIe 3.0 link caps sequential reads at 1700 MBps and random reads at 320,000 IOPS. Operating temperature is limited to 0 °C to 35 °C and the drive tolerates 2.17 GRMS vibration while running, so dense chassis must provide adequate airflow to stay within spec.

Βασικά χαρακτηριστικά

  • 2 TB capacity for high-density server storage
  • PCIe 3.0 x4 interface delivers up to 1700 MB/s sequential read speed
  • MLC memory sustains up to 320,000 random read IOPS
  • 2 million hour MTBF supports continuous enterprise workloads
  • 5 inch form factor fits standard drive bays

Προδιαγραφές

BrandIntel
ModelSSDPE2MX012T701
Form Factor2.5"
Capacity1.2TB
Memory ComponentsMLC
InterfacePCI-Express 3.0 x4
Max Sequential ReadUp to 1700 MBps
Max Sequential WriteUp to 1300 MBps
4KB Random ReadUp to 320,000 IOPS
4KB Random WriteUp to 26,000 IOPS
Read Latency20 µs
Write Latency20 µs
MTBF2,000,000 hours
Power Consumption (Idle)4W
Power Consumption (Active)11W (Write)
9W (Read)
Operating Temperature0°C ~ +35°C
Max Shock Resistance1000G/0.5msec
Max Vibration ResistanceOperating: 2.17 GRMS
Non-Operating: 3.13 GRMS
Height15.00mm
Weight125.00g
Βάρος αποστολής0.16 kg
Διαστάσεις συσκευασίας150 × 107 × 28 mm

Άλλες εκδόσεις αυτού του μοντέλου

1 ακόμη στην ίδια σειρά

Ίδια οικογένεια, διαφορετική μνήμη, ψύκτρα ή συχνότητα — συγκρίνετε πριν αποφασίσετε.

Ερωτήσεις για αυτό το προϊόν

How much power does the Intel SSDPE2MX012T701 draw when reading or writing continuously?

Active power is 9W during reads and 11W during writes, while idle power is 4W.

What slot and form factor does the SSDPE2MX012T701 require on my server board?

It needs a 2.5" PCI-Express 3.0 x4 slot; the drive is 15.00mm high and weighs 125.00g.

Will the 1.2TB PCIe 3.0 x4 MLC drive work in a system that only has older PCIe 2.0 slots?

The drive uses a PCI-Express 3.0 x4 interface; it will negotiate down to the slot speed available.

Επίσης σε αυτό το ράφι

Οι πελάτες σύγκριναν και αυτά

Ίδιο ράφι, ίδιο ταμείο — οκτώ νομίσματα και κλείδωμα ισοτιμίας 30 λεπτών.