Intel
Intel SSDSC2KG480GZ01 D3-S4620 480GB SATA 2.5-inch internal SSD
A 480 GB SATA internal SSD delivering up to 550 MB/s read and 500 MB/s write with 85000 IOPS random read and 48000 IOPS random write
- 480 GB capacity stores large workloads
- 550 MB/s sustained read speeds up data access
- 500 MB/s sustained write speeds handle heavy writes
- 85,000 IOPS random read accelerates small-file tasks
- 144-layer 3D NAND improves endurance and density
Intel D3-S4620 480 GB SATA SSD
The Intel D3-S4620 is a 480 GB internal solid-state drive using a SATA 6 Gbps interface in a 2.5-inch form factor. It delivers sustained reads up to 550 MB/s and sustained writes up to 500 MB/s. The drive employs 144-layer TLC 3D NAND for data storage.
Who this suits and who should look elsewhere
This drive suits users upgrading a laptop or desktop that accepts a 2.5-inch SATA device and who need 480 GB of capacity. Random read performance reaches 85 000 IOPS and random write reaches 48 000 IOPS over an 8 GB span. Builders who need higher capacity, a different physical connector, or faster sequential throughput should look at other options.
Deciding specification
The SATA 6 Gbps interface is the single specification that determines compatibility; the system must provide a matching SATA port and 2.5-inch bay for this drive to function.
Βασικά χαρακτηριστικά
- 480 GB capacity stores large workloads
- 550 MB/s sustained read speeds up data access
- 500 MB/s sustained write speeds handle heavy writes
- 85,000 IOPS random read accelerates small-file tasks
- 144-layer 3D NAND improves endurance and density
Προδιαγραφές
Δεν έχουν δημοσιευτεί ακόμη προδιαγραφές για αυτό το προϊόν.
Ερωτήσεις για αυτό το προϊόν
Does my motherboard need a SATA-6Gbps port to use this 480GB D3-S4620 drive?
Yes, the drive connects through a standard SATA-6Gbps interface and requires both a free SATA data port on the motherboard and a SATA power connector from the power supply.
Will the 2.5-inch form factor fit in the same drive bay as my older 2.5-inch mechanical hard drive?
The drive uses the same 2.5-inch form factor, so it mounts in any standard 2.5-inch bay or caddy that currently holds a mechanical drive.
How can I verify the drive is delivering the rated 550 MB/s read and 500 MB/s write speeds after installation?
Run a sequential benchmark such as CrystalDiskMark or AS SSD on a fresh partition; sustained results near 550 MB/s read and 500 MB/s write confirm the drive is operating at its specified throughput.
Επίσης σε αυτό το ράφι
Οι πελάτες σύγκριναν και αυτά
Ίδιο ράφι, ίδιο ταμείο — οκτώ νομίσματα και κλείδωμα ισοτιμίας 30 λεπτών.
