Δεχόμαστε κρυπτονομίσματα — έτσι ώστε αυτά που κατέχετε να μπορούν να αγοράσουν πραγματικό εξοπλισμό.Πληρώστε σε κρυπτονομίσματα, ξοδέψτε τα σε πραγματικό εξοπλισμό. Δωρεάν ασφαλισμένη αποστολή παγκοσμίως άνω των 399 $. Ουδέτερες κούτες αποστολής, χωρίς σήμανση, από τη Γερμανία.Δωρεάν ασφαλισμένη αποστολή άνω των 399 $. Η ισοτιμία σας κλειδώνει για 30 λεπτά μόλις ανοίξει το ταμείο.Κλείδωμα ισοτιμίας 30 λεπτών. Κάθε προϊόν είναι σφραγισμένο, ελεγμένο ως προς τον σειριακό αριθμό του, και καλύπτεται από εγγύηση 24 μηνών.Σφραγισμένο, με εγγύηση 24 μηνών.

Παρακολουθούμενα είδη Σύνδεση

KHACHIMO

KHACHIMO 241115.105 Eltek flatpack2 48/2000 he 53.5v 37.4a Rectifier Module

SKU CH-NQRS-5P069

A 48 V rectifier module delivering 2000 W at 53.5 V and 37.4 A for telecom power systems

  • TypeATX
  • Delivers 48 V at 37.4 A for telecom loads
  • High-efficiency flatpack2 design reduces energy waste
  • Tested working unit ensures reliable deployment
  • 2 kW output in compact rectifier module form

Eltek flatpack2 48 V rectifier module

The KHACHIMO 241115.105 is a new Eltek flatpack2 rectifier module rated for 48 V output, 2000 W capacity and 37.4 A maximum current at 53.5 V. It suits telecom or industrial DC power plants that use the flatpack2 form factor and need hot-swap rectifier redundancy. The ATX type designation indicates the mechanical interface for compatible shelves.

Check shelf compatibility before ordering

Verify that your existing power shelf accepts flatpack2 rectifiers and provides the correct 48 V DC bus voltage. Confirm the shelf can deliver the required AC input range and that blanking panels or control modules match the module’s signalling. Ensure the installation site meets the module’s environmental ratings.

Βασικά χαρακτηριστικά

  • Delivers 48 V at 37.4 A for telecom loads
  • High-efficiency flatpack2 design reduces energy waste
  • Tested working unit ensures reliable deployment
  • 2 kW output in compact rectifier module form

Προδιαγραφές

TypeATX

Ερωτήσεις για αυτό το προϊόν

Does the 241115.105 rectifier module ship with any mounting hardware or cables, or must those be purchased separately?

The listing covers a single 241115.105 Eltek flatpack2 48/2000 he rectifier module tested as working; mounting brackets, shelf rails and DC cables are not included and must be sourced separately.

The module is rated 48 V, 2000 W, 53.5 V output and 37.4 A — how do I decide if this capacity matches my shelf?

Match the shelf’s nominal 48 V bus, verify it accepts a 2000 W hot-swap rectifier, and confirm the shelf can deliver 53.5 V at up to 37.4 A per slot; if your shelf specifies lower current or power per slot, choose a lower-rated module instead.

Επίσης σε αυτό το ράφι

Οι πελάτες σύγκριναν και αυτά

Ίδιο ράφι, ίδιο ταμείο — οκτώ νομίσματα και κλείδωμα ισοτιμίας 30 λεπτών.