Δεχόμαστε κρυπτονομίσματα — έτσι ώστε αυτά που κατέχετε να μπορούν να αγοράσουν πραγματικό εξοπλισμό.Πληρώστε σε κρυπτονομίσματα, ξοδέψτε τα σε πραγματικό εξοπλισμό. Δωρεάν ασφαλισμένη αποστολή παγκοσμίως άνω των 399 $. Ουδέτερες κούτες αποστολής, χωρίς σήμανση, από τη Γερμανία.Δωρεάν ασφαλισμένη αποστολή άνω των 399 $. Η ισοτιμία σας κλειδώνει για 30 λεπτά μόλις ανοίξει το ταμείο.Κλείδωμα ισοτιμίας 30 λεπτών. Κάθε προϊόν είναι σφραγισμένο, ελεγμένο ως προς τον σειριακό αριθμό του, και καλύπτεται από εγγύηση 24 μηνών.Σφραγισμένο, με εγγύηση 24 μηνών.

Παρακολουθούμενα είδη Σύνδεση

KHACHIMO

KHACHIMO APW7+ 1800W power supply 10*6P 852

SKU CH-4TX5-R63F5

1800 W ATX power supply with ten 6-pin connectors for mining rigs

  • TypeATX
  • Delivers 1800 W for demanding mining rigs
  • Ten 6-pin connectors power multiple ASIC boards
  • Verified working unit ensures reliable operation
  • Built for APW7+ compatibility with S9 and L3+ miners

High-output mining power supply

This KHACHIMO APW7+ unit delivers 1800W through ten 6-pin connectors and is built for cryptocurrency mining rigs that demand sustained high current. It targets operators running ASIC hardware such as S9 or L3+ units where a single robust source replaces multiple smaller supplies.

Replaces multi-PSU mining setups

A single 1800W module removes the need to synchronise several lower-wattage units, reducing cable clutter and potential points of failure. The jump makes sense when a rig draws enough continuous power to justify one tested, high-capacity supply instead of a daisy-chained array.

Βασικά χαρακτηριστικά

  • Delivers 1800 W for demanding mining rigs
  • Ten 6-pin connectors power multiple ASIC boards
  • Verified working unit ensures reliable operation
  • Built for APW7+ compatibility with S9 and L3+ miners

Προδιαγραφές

TypeATX

Ερωτήσεις για αυτό το προϊόν

What clearance is needed for the ten 6-pin PCIe connectors on the APW7+ 1800W unit?

The ten 6-pin PCIe connectors sit on the front face; allow enough depth for straight or right-angle plugs plus cable bend radius behind the PSU.

Which installation step is most often missed when fitting this mining PSU?

Connecting all ten 6-pin PCIe cables to the hash boards before switching on the mains; the unit will not start if any required connector is loose.

Επίσης σε αυτό το ράφι

Οι πελάτες σύγκριναν και αυτά

Ίδιο ράφι, ίδιο ταμείο — οκτώ νομίσματα και κλείδωμα ισοτιμίας 30 λεπτών.