Δεχόμαστε κρυπτονομίσματα — έτσι ώστε αυτά που κατέχετε να μπορούν να αγοράσουν πραγματικό εξοπλισμό.Πληρώστε σε κρυπτονομίσματα, ξοδέψτε τα σε πραγματικό εξοπλισμό. Δωρεάν ασφαλισμένη αποστολή παγκοσμίως άνω των 399 $. Ουδέτερες κούτες αποστολής, χωρίς σήμανση, από τη Γερμανία.Δωρεάν ασφαλισμένη αποστολή άνω των 399 $. Η ισοτιμία σας κλειδώνει για 30 λεπτά μόλις ανοίξει το ταμείο.Κλείδωμα ισοτιμίας 30 λεπτών. Κάθε προϊόν είναι σφραγισμένο, ελεγμένο ως προς τον σειριακό αριθμό του, και καλύπτεται από εγγύηση 24 μηνών.Σφραγισμένο, με εγγύηση 24 μηνών.

Παρακολουθούμενα είδη Σύνδεση
KHACHIMO ATX power supply unit in metal housing

KHACHIMO

KHACHIMO ATX Power Supply 73-551-0012

SKU CH-F0F7-DJ66W

ATX power supply unit tested working for reliable system power delivery

  • TypeATX
  • ATX form factor fits standard desktop cases
  • Tested working so it powers on reliably
  • Good quality components support stable operation
  • First listed by manufacturer March 26 2024
  • Compatible with ASTEC 73-551-0012 systems

ATX power supply for ASTEC systems

This KHACHIMO unit is an ATX form-factor power supply built to match the 73-551-0012 part number used in ASTEC platforms. It is intended for technicians and system integrators who need a direct replacement that fits the original mounting points and connector layout. The unit arrives new and has been test-worked by the supplier to confirm basic operation.

Replaces the original ASTEC 73-551-0012 unit

Swapping in this supply makes sense when the factory unit has failed, shows voltage drift or cannot sustain load under modern component draws. The jump is worth it if the existing chassis and backplane remain serviceable and a like-for-like ATX replacement avoids rewiring or adapter cables. No new feature set is added; the goal is restored reliability in the same footprint.

Fits standard ATX bays and existing wiring

The supply mounts in any ATX-compatible bay and uses the native connector arrangement for the 73-551-0012 platform, freeing the builder from sourcing proprietary cables or pin-out adapters. It draws AC from the standard inlet and delivers the rail voltages the board expects, leaving headroom for the installed CPU, memory and peripheral complement. Ensure the case airflow path can exhaust the supply's heat as the original design intended.

Βασικά χαρακτηριστικά

  • ATX form factor fits standard desktop cases
  • Tested working so it powers on reliably
  • Good quality components support stable operation
  • First listed by manufacturer March 26 2024
  • Compatible with ASTEC 73-551-0012 systems

Προδιαγραφές

TypeATX

Ερωτήσεις για αυτό το προϊόν

Does the ATX form factor of this KHACHIMO 73-551-0012 unit match the standard mounting holes and depth for a typical case?

The unit follows the ATX form factor, so it uses the standard four-hole mounting pattern and depth expected by ATX-compatible cases.

What is the correct way to connect the main power cables to the motherboard and CPU, and which step is most often missed?

Seat the 24-pin motherboard connector and the 4-pin or 8-pin CPU power connector firmly until each latch clicks; the step most often missed is fully locking the CPU power latch.

Which components inside this 73-551-0012 power supply are likely to need replacement after several years of use?

The internal electrolytic capacitors and the cooling fan are the parts most likely to require replacement after extended operation.

Επίσης σε αυτό το ράφι

Οι πελάτες σύγκριναν και αυτά

Ίδιο ράφι, ίδιο ταμείο — οκτώ νομίσματα και κλείδωμα ισοτιμίας 30 λεπτών.