Δεχόμαστε κρυπτονομίσματα — έτσι ώστε αυτά που κατέχετε να μπορούν να αγοράσουν πραγματικό εξοπλισμό.Πληρώστε σε κρυπτονομίσματα, ξοδέψτε τα σε πραγματικό εξοπλισμό. Δωρεάν ασφαλισμένη αποστολή παγκοσμίως άνω των 399 $. Ουδέτερες κούτες αποστολής, χωρίς σήμανση, από τη Γερμανία.Δωρεάν ασφαλισμένη αποστολή άνω των 399 $. Η ισοτιμία σας κλειδώνει για 30 λεπτά μόλις ανοίξει το ταμείο.Κλείδωμα ισοτιμίας 30 λεπτών. Κάθε προϊόν είναι σφραγισμένο, ελεγμένο ως προς τον σειριακό αριθμό του, και καλύπτεται από εγγύηση 24 μηνών.Σφραγισμένο, με εγγύηση 24 μηνών.

Παρακολουθούμενα είδη Σύνδεση
KHACHIMO CR48-3G 5800W ATX power supply unit

KHACHIMO

KHACHIMO CR48-3G 5800W Power Supply Module

SKU CH-5JY9-B9516

ATX power module rated at 5800 W, first listed by the manufacturer in March 2024

  • TypeATX
  • ATX form factor fits standard chassis builds
  • 5800W capacity supports high-demand component configurations
  • Module tested working before shipment
  • Quality components ensure reliable power delivery
  • Listed by manufacturer on 19 March 2024

CR48-3G 5800W ATX Power Module

The KHACHIMO CR48-3G is a 5800W ATX power supply module built for systems that demand very high output. It is supplied new and test working, targeting workstations and servers with extreme power requirements. The unit follows the standard ATX form factor for compatibility with matching chassis and motherboards. First listed by the manufacturer in March 2024, it represents a current high-capacity option.

Suits builds needing maximum wattage from a single

This module suits integrators assembling multi-GPU render nodes, compute clusters or storage arrays where 5800W is required. It is not for standard desktop PCs, gaming rigs or workstations that operate well below this output level. Buyers with modest power budgets or limited cooling capacity should look at lower-wattage ATX units instead. The physical size and connector layout must match the target chassis and backplane.

5800W rated output

The single specification that determines fit is the 5800W rating, which must align with the total system load including peak transients. Verify that the motherboard, backplane and GPU power cables match the module’s connector set before purchase. Cooling airflow and rack space must support continuous operation at this level. No other wattage variant is described for this model.

Βασικά χαρακτηριστικά

  • ATX form factor fits standard chassis builds
  • 5800W capacity supports high-demand component configurations
  • Module tested working before shipment
  • Quality components ensure reliable power delivery
  • Listed by manufacturer on 19 March 2024

Προδιαγραφές

TypeATX

Ερωτήσεις για αυτό το προϊόν

How do I install the ATX power supply module and what step is commonly missed?

Mount the unit in the chassis using the standard ATX screw pattern, connect the 24-pin motherboard cable and all required peripheral leads, then verify the power switch is set to the correct input voltage before turning on.

What maintenance or replacement will the CR48-3G need over time?

Plan to clean dust from the intake and exhaust vents every few months and replace the internal cooling fan if bearing noise appears, as the 5800 W rating depends on steady airflow.

What limit appears first when the supply runs at high load for long periods?

Thermal protection will trigger before the 5800 W output can be sustained continuously, so ensure the case provides adequate ventilation to avoid shutdowns.

Επίσης σε αυτό το ράφι

Οι πελάτες σύγκριναν και αυτά

Ίδιο ράφι, ίδιο ταμείο — οκτώ νομίσματα και κλείδωμα ισοτιμίας 30 λεπτών.