BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
214,99 $
0.00281088BTC
Διαθέσιμο
Kingston Technology Corp.
Kingston Technology Corp. KTD-PN432ES8/16G 16GB DDR4 3200 CL22 1.20V ECC Unbuffered server RAM
16 GB DDR4 3200 SO-DIMM with ECC and CL22 latency for mobile workstations
- Capacity16GB
- Type260-Pin DDR4 SO-DIMM
- SpeedDDR4 3200 (PC4 25600)
- CAS LatencyCL22
- Voltage1.20V
- ECCYes
- 16 GB capacity handles memory-intensive workloads
- 3200 MHz DDR4 speed with CL22 latency for responsive operation
- ECC unbuffered design protects data integrity
- 260-pin SO-DIMM form factor fits mobile workstations
- 20 V operation with Intel XMP 2.0 profile support
16 GB DDR4-3200 SO-DIMM for mobile workstations
This 16 GB DDR4 module runs at 3200 MHz with CL22 latency and 1.20 V operation. It uses a 260-pin SO-DIMM form factor and includes ECC error correction with unbuffered signalling. Intel XMP 2.0 support allows simple profile selection for compatible platforms.
Suits mobile workstations needing ECC SO-DIMM memory
Ideal for laptops or compact workstations that require 260-pin DDR4 ECC modules at 3200 MHz. Not for systems that accept only registered or load-reduced DIMMs, nor for desktop boards needing standard 288-pin UDIMMs. Buyers wanting non-ECC memory or higher-speed profiles should look elsewhere.
Verify SO-DIMM slot count
Confirm the platform accepts 260-pin DDR4 SO-DIMMs and can enable ECC on unbuffered modules. Check the maximum supported speed and whether the BIOS honours XMP 2.0 profiles. Ensure the total capacity per slot and overall system limit match your planned configuration.
Βασικά χαρακτηριστικά
- 16 GB capacity handles memory-intensive workloads
- 3200 MHz DDR4 speed with CL22 latency for responsive operation
- ECC unbuffered design protects data integrity
- 260-pin SO-DIMM form factor fits mobile workstations
- 20 V operation with Intel XMP 2.0 profile support
Προδιαγραφές
| Brand | Kingston |
|---|---|
| Model | KTD-PN432ES8/16G |
| Capacity | 16GB |
| Type | 260-Pin DDR4 SO-DIMM |
| Speed | DDR4 3200 (PC4 25600) |
| CAS Latency | CL22 |
| Voltage | 1.20V |
| ECC | Yes |
| Buffered/Registered | Unbuffered |
| Rank | 1Rx8 |
| BIOS/Performance Profile | Intel XMP 2.0 |
| Heat Spreader | No |
| Βάρος αποστολής | 0.02 kg |
| Διαστάσεις συσκευασίας | 89 × 46 × 5 mm |
Ερωτήσεις για αυτό το προϊόν
Does my mobile workstation need a 260-pin SO-DIMM slot for this module?
Yes, this is a 260-pin DDR4 SO-DIMM, so the workstation must provide a matching DDR4 SO-DIMM socket.
Will this 3200 MHz CL22 stick run at its rated speed next to slower DDR4 modules I keep?
The module uses Intel XMP 2.0; if the system enables XMP it will target 3200 MHz CL22, otherwise it will fall back to the highest common JEDEC speed supported by all installed modules.
How can I confirm the ECC function is active after installation?
Check the BIOS memory information or the operating system hardware report — both should show ECC enabled for the 16 GB capacity.
Επίσης σε αυτό το ράφι
Οι πελάτες σύγκριναν και αυτά
Ίδιο ράφι, ίδιο ταμείο — οκτώ νομίσματα και κλείδωμα ισοτιμίας 30 λεπτών.
