SanDisk
SanDisk Cruzer Blade 8 GB USB 2.0 USB flash drive Black SDCZ50-008G-B35
391,99 $
0.00501555BTC
Διαθέσιμο
Kingston Technology Corp.
Kingston Technology Corp. KVR13LR9D8/4HC 4GB DDR3 1333 ECC Registered Server RAM
4GB DDR3 1333 ECC registered server memory module with CL9 latency and 1.35V operation
- Capacity4GB
- Type240-Pin DDR3 SDRAM
- SpeedDDR3 1333
- CAS LatencyCL9
- Voltage1.35V
- ECCYes
- ECC registered design protects data integrity in server workloads
- Low 1.35V operation reduces power draw and heat output
- DDR3 1333 speed with CL9 latency delivers responsive performance
- 240-pin DDR3 form factor fits standard server DIMM slots
- 100% tested to JEDEC specifications for reliable compatibility
Server Memory Module
This Kingston ValueRAM module is a 4 GB DDR3 registered DIMM with ECC and a CL9 latency at 1333 MT/s. It operates at 1.35 V and uses a 240-pin form factor built with DR x8 chips. The part is designed for server platforms that require registered error-correcting memory.
Suited For And Limitations
This module suits administrators maintaining or expanding DDR3 servers that specifically call for registered ECC memory at 1333 MT/s. It is not suited for systems that require unbuffered memory, higher speeds, larger single-module capacities or a different DDR generation.
Deciding Specification
The registered ECC design is the single specification that determines whether this is the correct part. Only systems with memory controllers that support registered DDR3 modules can use this memory.
Βασικά χαρακτηριστικά
- ECC registered design protects data integrity in server workloads
- Low 1.35V operation reduces power draw and heat output
- DDR3 1333 speed with CL9 latency delivers responsive performance
- 240-pin DDR3 form factor fits standard server DIMM slots
- 100% tested to JEDEC specifications for reliable compatibility
Προδιαγραφές
| Brand | Kingston |
|---|---|
| Model | KVR13LR9D8/4HC |
| Capacity | 4GB |
| Type | 240-Pin DDR3 SDRAM |
| Speed | DDR3 1333 |
| CAS Latency | CL9 |
| Voltage | 1.35V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Βάρος αποστολής | 0.02 kg |
| Διαστάσεις συσκευασίας | 171 × 57 × 13 mm |
Ερωτήσεις για αυτό το προϊόν
What motherboard slot and voltage must my server provide for this 240-pin DDR3 1333 registered module?
The module fits a 240-pin DDR3 slot and operates at 1.35 V; the motherboard must support registered ECC DDR3 at that voltage.
Can I mix this CL9 1.35 V registered ECC stick with older 1.5 V unbuffered DDR3 modules in the same system?
No; registered ECC modules require a compatible registered memory controller and matching voltage, so they cannot be mixed with unbuffered or 1.5 V sticks.
How do I verify the module is running at DDR3 1333 with ECC active after installation?
Check the BIOS or UEFI memory information screen: it should report 1333 MT/s, CL9 timings, 1.35 V and ECC enabled for the installed capacity.
Επίσης σε αυτό το ράφι
Οι πελάτες σύγκριναν και αυτά
Ίδιο ράφι, ίδιο ταμείο — οκτώ νομίσματα και κλείδωμα ισοτιμίας 30 λεπτών.
