Δεχόμαστε κρυπτονομίσματα — έτσι ώστε αυτά που κατέχετε να μπορούν να αγοράσουν πραγματικό εξοπλισμό.Πληρώστε σε κρυπτονομίσματα, ξοδέψτε τα σε πραγματικό εξοπλισμό. Δωρεάν ασφαλισμένη αποστολή παγκοσμίως άνω των 399 $. Ουδέτερες κούτες αποστολής, χωρίς σήμανση, από τη Γερμανία.Δωρεάν ασφαλισμένη αποστολή άνω των 399 $. Η ισοτιμία σας κλειδώνει για 30 λεπτά μόλις ανοίξει το ταμείο.Κλείδωμα ισοτιμίας 30 λεπτών. Κάθε προϊόν είναι σφραγισμένο, ελεγμένο ως προς τον σειριακό αριθμό του, και καλύπτεται από εγγύηση 24 μηνών.Σφραγισμένο, με εγγύηση 24 μηνών.

Παρακολουθούμενα είδη Σύνδεση
Spool of translucent off-white 2.85 mm filament on plastic reel

Lay Filaments

Lay Filaments HIGH-T-Lay Dissolvable Support Filament 2.85 mm 0.75 kg 3D Printers Accessories

SKU CH-NTFN-VPDN8

Water-soluble support filament withstands 100 °C, prints at 235–250 °C, and dissolves without chemicals for complex ABS, POM, or polycarbonate parts

  • Dissolves quickly in plain water without harsh chemicals
  • Withstands 100 °C for extended periods during printing
  • Adheres strongly to ABS, POM and polycarbonate
  • Extrudes at 235–250 °C with ±0.1 mm tolerance
  • 75 kg spool of 2.85 mm water-soluble filament

High-temperature dissolvable support

High-T-Lay is a water-soluble support filament designed for printers that run at elevated temperatures. It withstands 100 °C for long periods and prints at 235 to 250 °C with a 50 °C bed. The 2.85 mm diameter suits compatible Bowden and direct-drive systems. Makers printing complex geometries with ABS, POM or polycarbonate gain reliable support removal without chemical solvents.

Build integration and material pairing

The spool weighs 0.75 kg and holds to a ± 0.1 mm diameter tolerance for consistent extrusion. It adheres strongly to ABS, POM and polycarbonate, enabling dual-extrusion prints where the model material demands high heat resistance. No heated enclosure or proprietary hardware is required beyond a printer capable of the stated nozzle and bed temperatures. Dissolving occurs in plain water, removing the need for D-Limonene or ventilation for solvent fumes.

Capacity limits and operational boundaries

The 0.75 kg spool provides enough length for multiple medium-sized prints or a single large job with dense supports. Heat resistance tops out at 100 °C, so it cannot support materials that require sustained chamber or nozzle temperatures above that threshold. The filament is not intended for structural parts or end-use components; it dissolves completely when submerged. Users needing larger spool sizes or different diameters must source separate products.

Βασικά χαρακτηριστικά

  • Dissolves quickly in plain water without harsh chemicals
  • Withstands 100 °C for extended periods during printing
  • Adheres strongly to ABS, POM and polycarbonate
  • Extrudes at 235–250 °C with ±0.1 mm tolerance
  • 75 kg spool of 2.85 mm water-soluble filament

Προδιαγραφές

BrandLay Filaments

Ερωτήσεις για αυτό το προϊόν

How hot can the support material get before it starts to soften during a long print?

It withstands temperatures of 100 °C for extended periods, making it suitable for high-temperature technical filaments.

What bed temperature should I set for reliable adhesion when printing all day?

A heated bed at 50 °C is recommended for consistent first-layer adhesion during continuous printing.

Which model filaments does this support filament bond to without extra preparation?

It adheres well to ABS, POM and polycarbonate, so you need one of those as your primary model material.

Επίσης σε αυτό το ράφι

Οι πελάτες σύγκριναν και αυτά

Ίδιο ράφι, ίδιο ταμείο — οκτώ νομίσματα και κλείδωμα ισοτιμίας 30 λεπτών.