Lemincrash
Lemincrash ATX 400W RGB server power supply 110-230V 20+4Pin 120mm fan
ATX 400 W server power supply with 120 mm fan, RGB lighting and 20+4 pin connector for 110-230 V input
- TypeATX
- Maximum Power400W
- Main Connector20+4Pin
- Output Current3.3V 12A 40W
- Output3.3V 12A 40W
- Input Voltage110-230V
- 400W output powers demanding server builds
- 120mm hydraulic-bearing fan keeps temperatures low
- 105°C capacitors extend power-supply lifespan
- 110-230V input works worldwide without a switch
- RGB-lit fan adds colour while the system runs
ATX 400W server power supply
The Lemincrash ATX 400W unit delivers 400W of continuous power through a 20+4Pin main connector and a 12V connector for modern graphics cards and motherboards. It operates on 110-230V input at 50/60 Hz with a 5A input current rating. A 120mm hydraulic-bearing fan provides cooling while integrated RGB lighting activates during operation.
ATX form factor limits
The standard ATX dimensions of 150mm by 140mm by 85mm fit typical server and desktop chassis designed for this form factor. The single 120mm fan handles thermal loads within the 400W envelope but offers no redundancy for mission-critical uptime. Input voltage auto-ranging covers 110V to 230V without a manual switch.
400W capacity headroom
The 3.3V rail supplies 12A for a maximum of 40W, supporting peripheral and logic loads on compatible boards. Total output of 400W suits entry-level builds with modest CPU and single-GPU configurations. Systems requiring multiple high-end GPUs, heavy overclocking or redundant power paths will exceed the practical headroom of this unit.
Βασικά χαρακτηριστικά
- 400W output powers demanding server builds
- 120mm hydraulic-bearing fan keeps temperatures low
- 105°C capacitors extend power-supply lifespan
- 110-230V input works worldwide without a switch
- RGB-lit fan adds colour while the system runs
Προδιαγραφές
| Model | ATX 400W |
|---|---|
| Part Number | ATX 400W |
| Type | ATX |
| Maximum Power | 400W |
| Main Connector | 20+4Pin |
| Output Current | 3.3V 12A 40W |
| Output | 3.3V 12A 40W |
| Input Voltage | 110-230V |
| Input Frequency Range | 50/60 Hz |
| Input Current | 5A |
| Fans | 1 x 120 mm |
Ερωτήσεις για αυτό το προϊόν
Should I pick the 3.3V 12A rail or the 12V connector for my build?
The 3.3V rail delivers 40W for legacy components while the 12V connector powers modern graphics cards and motherboards; both are present on the same unit.
What does the 400W rating actually deliver inside my case?
It supplies up to 400W total across all rails with a 120mm hydraulic-bearing fan keeping temperatures down under load.
Is the 20+4Pin ATX connector limited to 110V or 230V input?
The supply accepts 110-230V at 50/60Hz so the single 20+4Pin connector works worldwide without switching.
Επίσης σε αυτό το ράφι
Οι πελάτες σύγκριναν και αυτά
Ίδιο ράφι, ίδιο ταμείο — οκτώ νομίσματα και κλείδωμα ισοτιμίας 30 λεπτών.
Mushkin Enhanced 4GB DDR2-800 CL6 SoDIMM Apple 971741A memory upgrade
SK hynix HYMD232M646C6-J 256MB DDR 333MHz PC2700 CL2.5 SODIMM laptop RAM
- 4GB (2 x 2GB)



