Lian Li
Lian Li BR DIGITAL-3R S 120mm 3-pack case fan
Three 120 mm PWM case fans with addressable RGB LEDs, fluid-dynamic bearings and 900–1800 RPM speed range
- Fan Counts3 Fans
- TypeCase Fan
- CompatibilityCase
- Fan Thickness27mm
- Bearing TypeFluid Dynamic
- RPM900~1800 RPM
- Sandblasted aluminium frame adds rigidity and a premium silver finish
- 12 addressable RGB LEDs per fan enable independent colour control
- Fluid dynamic bearing runs at 19.4 to 29 dBA for quiet operation
- PWM speed range of 900 to 1800 RPM delivers up to 57.97 CFM airflow
- Three fans included with 4-pin power and 5 V ARGB connectors
Three-fan pack with aluminium frame
This Lian Li BR DIGITAL-3R S kit supplies three 120 mm case fans built around a sandblasted aluminium frame. Each fan runs on a fluid-dynamic bearing and offers PWM control between 900 and 1800 RPM. Independent addressable RGB lighting uses twelve LEDs per fan for per-LED colour control.
Builders who want coordinated RGB and a metal frame
The pack suits builders who want matched airflow and synchronised lighting across three intake or exhaust positions. The 27 mm thickness and 1.46 m-H2O static pressure figure mean the fans are less suited to very tight radiator stacks or slim cases where a thinner profile is required.
27 mm frame thickness
At 27 mm thick these fans occupy more depth than many standard models, so the single dimension that decides fit is the 27 mm frame thickness. Check your case, radiator or cooler clearance against that figure before purchasing.
Βασικά χαρακτηριστικά
- Sandblasted aluminium frame adds rigidity and a premium silver finish
- 12 addressable RGB LEDs per fan enable independent colour control
- Fluid dynamic bearing runs at 19.4 to 29 dBA for quiet operation
- PWM speed range of 900 to 1800 RPM delivers up to 57.97 CFM airflow
- Three fans included with 4-pin power and 5 V ARGB connectors
Προδιαγραφές
| Brand | Lian li |
|---|---|
| Series | BR DIGITAL |
| Model | BR DIGITAL-3R S |
| Fan Counts | 3 Fans |
| Type | Case Fan |
| Compatibility | Case |
| Fan Thickness | 27mm |
| Bearing Type | Fluid Dynamic |
| RPM | 900~1800 RPM |
| Air Flow | 57.97CFM |
| Noise Level | 19.4~29 dB |
| Power Connector | 4 Pin |
| Color | Silver |
| LED | Addressable RGB |
| Βάρος αποστολής | 0.75 kg |
| Διαστάσεις συσκευασίας | 160 × 145 × 94 mm |
Ερωτήσεις για αυτό το προϊόν
What clearance does the 27mm thickness need in my case?
Each fan measures 120mm x 120mm x 27mm, so verify your case allows at least 27mm depth at the mounting points.
How do I connect the 4-pin PWM and the 5V ARGB cables correctly?
Plug the 4-pin connector into a motherboard PWM header for speed control and the 3-pin 5V ARGB header into a matching 5V addressable RGB header; reversing them will prevent lighting control.
When should I expect to replace the fluid dynamic bearings?
The fluid dynamic bearing is rated for long life; plan replacement only if noise rises above the 19.4~29 dBA range or RPM drops below 900~1800 RPM under load.
Επίσης σε αυτό το ράφι
Οι πελάτες σύγκριναν και αυτά
Ίδιο ράφι, ίδιο ταμείο — οκτώ νομίσματα και κλείδωμα ισοτιμίας 30 λεπτών.
ModMyMods
ModMyMods MOD-0002 3/8" ID x 1/2" OD Clear PVC Tubing DIY Cooling
- Clear
0,82 $
0.00001048BTC
Διαθέσιμο