Δεχόμαστε κρυπτονομίσματα — έτσι ώστε αυτά που κατέχετε να μπορούν να αγοράσουν πραγματικό εξοπλισμό.Πληρώστε σε κρυπτονομίσματα, ξοδέψτε τα σε πραγματικό εξοπλισμό. Δωρεάν ασφαλισμένη αποστολή παγκοσμίως άνω των 399 $. Ουδέτερες κούτες αποστολής, χωρίς σήμανση, από τη Γερμανία.Δωρεάν ασφαλισμένη αποστολή άνω των 399 $. Η ισοτιμία σας κλειδώνει για 30 λεπτά μόλις ανοίξει το ταμείο.Κλείδωμα ισοτιμίας 30 λεπτών. Κάθε προϊόν είναι σφραγισμένο, ελεγμένο ως προς τον σειριακό αριθμό του, και καλύπτεται από εγγύηση 24 μηνών.Σφραγισμένο, με εγγύηση 24 μηνών.

Παρακολουθούμενα είδη Σύνδεση

Lian Li

Lian Li UF-AL120-1W 120mm ARGB case fan, white, single pack, no controller

SKU CH-VMWD-NWYVD MPN UF-AL120-1W

A 120 mm ARGB case fan in white, 25 mm thick, sold as a single unit without a controller

  • Fan Counts1 Fan
  • Fan ControllerNo Controller
  • TypeCase Fan
  • CompatibilityCase
  • Fan Thickness25mm
  • ColorWhite

Model 800 - 1900 RPM

Option 1 Pack

  • 120 mm ARGB fan adds coloured lighting to the build
  • Single 25 mm thick unit fits standard 12 cm mounting points
  • White blades and frame suit light-themed interiors
  • No controller included so you connect directly to a 5 V ARGB header
  • One fan per pack lets you expand cooling exactly as needed

Single white 120 mm ARGB fan

The Lian Li UF-AL120-1W is a 120 mm case fan with addressable RGB lighting in a white finish. It ships as a single unit without a controller, so the builder must provide ARGB headers or a separate hub. The 25 mm thickness matches the standard mounting depth for most modern cases. This fan suits builders who want to add a single illuminated intake or exhaust point.

Daisy-chain mounting without a bundled controller

The fan uses Lian Li’s interlocking frame so multiple units can connect side by side and share a single ARGB cable run. Because no controller is included, the motherboard or an external ARGB hub must supply the 5 V addressable signal and PWM control. This arrangement frees a motherboard header when several fans are linked together. Builders without spare ARGB headers or a compatible hub cannot use the lighting effects.

One fan for targeted airflow or accent lighting

A single 120 mm fan delivers focused airflow for a CPU cooler radiator, a GPU bracket or a tight chassis corner. The ARGB LEDs provide colour accent without the output of a multi-fan array. It does not replace a full front-panel stack for high-static-pressure builds. Buyers who need more than one fan or a complete lighting kit should look for multi-pack options.

Βασικά χαρακτηριστικά

  • 120 mm ARGB fan adds coloured lighting to the build
  • Single 25 mm thick unit fits standard 12 cm mounting points
  • White blades and frame suit light-themed interiors
  • No controller included so you connect directly to a 5 V ARGB header
  • One fan per pack lets you expand cooling exactly as needed

Προδιαγραφές

BrandLian li
Fan Counts1 Fan
Fan ControllerNo Controller
TypeCase Fan
CompatibilityCase
Fan Thickness25mm
ColorWhite
LEDARGB
Βάρος αποστολής0.23 kg
Διαστάσεις συσκευασίας178 × 133 × 32 mm

Άλλες εκδόσεις αυτού του μοντέλου

4 ακόμη στην ίδια σειρά

Ίδια οικογένεια, διαφορετική μνήμη, ψύκτρα ή συχνότητα — συγκρίνετε πριν αποφασίσετε.

Ερωτήσεις για αυτό το προϊόν

How many fans can be daisy-chained before the signal degrades?

Each pack contains one 120 mm fan; connect up to three units in series using the built-in interlocking connectors.

What noise and temperature levels should I expect during continuous operation?

The 25 mm thick blade runs at standard case-fan speeds; typical noise stays in the low-decibel range while moving enough air for all-day cooling.

Which motherboard header or controller is required to drive the ARGB lighting?

A 5 V 3-pin ARGB header on the motherboard or a separate ARGB controller is needed; this single pack ships without a controller.

Επίσης σε αυτό το ράφι

Οι πελάτες σύγκριναν και αυτά

Ίδιο ράφι, ίδιο ταμείο — οκτώ νομίσματα και κλείδωμα ισοτιμίας 30 λεπτών.