NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Δεχόμαστε κρυπτονομίσματα — έτσι ώστε αυτά που κατέχετε να μπορούν να αγοράσουν πραγματικό εξοπλισμό.Πληρώστε σε κρυπτονομίσματα, ξοδέψτε τα σε πραγματικό εξοπλισμό. Δωρεάν ασφαλισμένη αποστολή παγκοσμίως άνω των 399 $. Ουδέτερες κούτες αποστολής, χωρίς σήμανση, από τη Γερμανία.Δωρεάν ασφαλισμένη αποστολή άνω των 399 $. Η ισοτιμία σας κλειδώνει για 30 λεπτά μόλις ανοίξει το ταμείο.Κλείδωμα ισοτιμίας 30 λεπτών. Κάθε προϊόν είναι σφραγισμένο, ελεγμένο ως προς τον σειριακό αριθμό του, και καλύπτεται από εγγύηση 24 μηνών.Σφραγισμένο, με εγγύηση 24 μηνών.
LORDWORLD
A 1.44inch 128x128 SPI LCD HAT with 5-way joystick, three buttons and 65K colour ST7735S driver, plugging directly onto any 40-pin Raspberry Pi with demo code included
This LORDWORLD HAT adds a 1.44-inch RGB display with 128x128 resolution to compatible Raspberry Pi boards. It integrates a 5-way joystick and three push buttons for direct interactive control. The ST7735S driver delivers 65K colours over an SPI interface. It targets makers and developers building compact visual interfaces for IoT edge projects.
The board uses a standard 40-pin GPIO extension header for connection. Verify that your Raspberry Pi model — such as Pi 5, 4B, 3B+, 3A+ or Zero series — exposes this full header. Ensure no other HAT or peripheral occupies the required SPI pins. The module draws power directly from the GPIO rail, so confirm your Pi supply can handle the additional load.
Open-source example codes for Raspberry Pi are included to simplify driver initialisation and screen rendering. They demonstrate joystick and button input handling for menu navigation. This reduces bring-up time for both beginners and experienced developers. No additional software licences or proprietary tools are required to start programming the display.
| Brand | LORDWORLD |
|---|
The board includes the 1.44 inch 128x128 SPI display with ST7735S driver, a 5-way joystick, three push buttons and a 40-pin GPIO extension header. It plugs directly into Raspberry Pi 5, 4B, 3B+, 3A+ or Zero models, so no additional hardware is required for connection. Demo codes and documentation are also supplied.
This HAT is offered only in the 1.44 inch diagonal size with 128x128 pixel resolution and 65K colour depth via the ST7735S controller. No alternative screen sizes, resolutions or driver variants are available for this model.
The 128x128 pixel grid driven by the ST7735S controller provides a compact RGB canvas capable of 65K colours over the SPI bus. It is suited for status readouts, simple menus, icons or retro-style graphics in Raspberry Pi projects where a small interactive display is needed.
Επίσης σε αυτό το ράφι
Ίδιο ράφι, ίδιο ταμείο — οκτώ νομίσματα και κλείδωμα ισοτιμίας 30 λεπτών.
Το νόμισμα στο οποίο πληρώνετε, και αυτό στο οποίο βλέπετε τις τιμές.
Αποστέλλεται από το πορτοφόλι σας στο ταμείο
Μόνο για προβολή — ο κατάλογος αναγράφεται σε δολάρια
Κανένα νόμισμα δεν αντιστοιχεί.
Επιλέξτε τη γλώσσα στην οποία σας μιλάει ο ιστότοπος.
Πρώτη επίσκεψη;
Έχετε ήδη λογαριασμό;
Δεν υπάρχει αυτόματη επαναφορά κωδικού: αυτό το κατάστημα δεν στέλνει e-mail, άρα δεν υπάρχει σύνδεσμος μίας χρήσης να ζητήσετε. Αφήστε τη διεύθυνση στον λογαριασμό σας και κάποιος θα την επεξεργαστεί με το χέρι.
Το αίτημα καταχωρίστηκε
Δεν θα λάβετε τίποτα στα εισερχόμενά σας — το κατάστημα δεν στέλνει κανένα e-mail. Κάποιος το διαχειρίζεται με το χέρι.
Τον θυμηθήκατε;