Δεχόμαστε κρυπτονομίσματα — έτσι ώστε αυτά που κατέχετε να μπορούν να αγοράσουν πραγματικό εξοπλισμό.Πληρώστε σε κρυπτονομίσματα, ξοδέψτε τα σε πραγματικό εξοπλισμό. Δωρεάν ασφαλισμένη αποστολή παγκοσμίως άνω των 399 $. Ουδέτερες κούτες αποστολής, χωρίς σήμανση, από τη Γερμανία.Δωρεάν ασφαλισμένη αποστολή άνω των 399 $. Η ισοτιμία σας κλειδώνει για 30 λεπτά μόλις ανοίξει το ταμείο.Κλείδωμα ισοτιμίας 30 λεπτών. Κάθε προϊόν είναι σφραγισμένο, ελεγμένο ως προς τον σειριακό αριθμό του, και καλύπτεται από εγγύηση 24 μηνών.Σφραγισμένο, με εγγύηση 24 μηνών.

Παρακολουθούμενα είδη Σύνδεση

LORDWORLD

LORDWORLD 8 inch 2K Touchscreen 1536×2048 IPS Display

SKU CH-5BZP-C7RN0

8-inch 2K IPS touchscreen with 1536×2048 resolution, 10-point capacitive touch, driver-free on Windows 11, 10, 8.1, 8, 7, and compatible with Raspberry Pi 4B and CM4

  • 2K 1536×2048 IPS panel delivers sharp visuals for Raspberry Pi 4B and CM4
  • 10-point capacitive touch works on Windows 11, 10, 8.1, 8 and 7 without extra drivers
  • Portrait orientation by default on Pi 4B, switchable to landscape via software config
  • Compatible with Jetson Nano and PC for versatile development use
  • New condition ensures reliable performance out of the box

8-Inch 2K IPS Touch Display

The LORDWORLD 8-inch display delivers a 1536×2048 IPS panel with 10-point capacitive touch. It is built for Raspberry Pi 4B and Compute Module 4 boards that can drive its 2K resolution. The screen also works as a driver-free touch monitor for Windows PCs.

Who it suits and who it does not

Makers using a Pi 4B or CM4 get a ready-to-run high-resolution touchscreen. Builders with older Pi models or other single-board computers lacking equivalent GPU performance will not be able to drive the panel fully.

1536×2048 resolution requirement

The 1536×2048 pixel count demands GPU performance at least equal to a Pi 4B. If the host device cannot meet that graphics capability the display will not operate at its native resolution.

Βασικά χαρακτηριστικά

  • 2K 1536×2048 IPS panel delivers sharp visuals for Raspberry Pi 4B and CM4
  • 10-point capacitive touch works on Windows 11, 10, 8.1, 8 and 7 without extra drivers
  • Portrait orientation by default on Pi 4B, switchable to landscape via software config
  • Compatible with Jetson Nano and PC for versatile development use
  • New condition ensures reliable performance out of the box

Προδιαγραφές

BrandLORDWORLD

Ερωτήσεις για αυτό το προϊόν

Which Raspberry Pi board do I need to drive the 1536×2048 panel at full resolution?

Only the Raspberry Pi 4B or Compute Module 4 have enough GPU performance to drive the 2K panel completely; earlier boards cannot.

Will the touchscreen work on a Windows 10 PC without installing extra drivers?

Yes, the display supports 10-point touch on Windows 11, 10, 8.1, 8 and 7 with no driver installation required.

How can I confirm the screen is running at its native 1536×2048 resolution after setup?

Check the display settings on the host device — it should report 1536×2048, and the desktop should fill the panel without scaling or black borders.

Επίσης σε αυτό το ράφι

Οι πελάτες σύγκριναν και αυτά

Ίδιο ράφι, ίδιο ταμείο — οκτώ νομίσματα και κλείδωμα ισοτιμίας 30 λεπτών.