Δεχόμαστε κρυπτονομίσματα — έτσι ώστε αυτά που κατέχετε να μπορούν να αγοράσουν πραγματικό εξοπλισμό.Πληρώστε σε κρυπτονομίσματα, ξοδέψτε τα σε πραγματικό εξοπλισμό. Δωρεάν ασφαλισμένη αποστολή παγκοσμίως άνω των 399 $. Ουδέτερες κούτες αποστολής, χωρίς σήμανση, από τη Γερμανία.Δωρεάν ασφαλισμένη αποστολή άνω των 399 $. Η ισοτιμία σας κλειδώνει για 30 λεπτά μόλις ανοίξει το ταμείο.Κλείδωμα ισοτιμίας 30 λεπτών. Κάθε προϊόν είναι σφραγισμένο, ελεγμένο ως προς τον σειριακό αριθμό του, και καλύπτεται από εγγύηση 24 μηνών.Σφραγισμένο, με εγγύηση 24 μηνών.

Παρακολουθούμενα είδη Σύνδεση
Green rectangular circuit board with ESP32 chip, servo connectors, and pin headers

LORDWORLD

LORDWORLD ESP32 Servo Driver Expansion Board 253 Servos

SKU CH-247D-KETQC

Controls up to 253 serial bus servos via ESP32 with Wi-Fi, Bluetooth and ESP-NOW for remote robot projects

  • Controls up to 253 serial bus servos simultaneously
  • Wide 6-12V input range matches servo voltage needs
  • Built-in WiFi, Bluetooth and ESP-NOW enable wireless control
  • Automatic download circuit simplifies program uploading
  • Compact design fits space-constrained robotics projects

ESP32 Servo Driver for 253 Serial Bus Servos

This LORDWORLD expansion board is an ESP32-based IoT edge device built to drive SC and ST series serial bus servos. It suits makers and robotics developers who need to coordinate large numbers of servos from a single compact controller. Built-in WiFi, Bluetooth and ESP-NOW enable wireless operation and remote debugging.

Simple Upload Circuit

An automatic download circuit streamlines firmware uploads so code can be pushed without manual boot toggles. The board accepts a wide 6-12V input range, but the supply voltage must match the servo voltage to avoid damage. Adequate current capacity is essential when driving all 253 channels simultaneously.

For Large-Scale Servo Projects in Tight Spaces

The compact footprint fits space-constrained robots, hexapods and animatronics where dozens of servos must share one controller. Open-source web tools and example structures accelerate development. Builders needing only a few servos or a different bus protocol should consider simpler driver boards.

Βασικά χαρακτηριστικά

  • Controls up to 253 serial bus servos simultaneously
  • Wide 6-12V input range matches servo voltage needs
  • Built-in WiFi, Bluetooth and ESP-NOW enable wireless control
  • Automatic download circuit simplifies program uploading
  • Compact design fits space-constrained robotics projects

Προδιαγραφές

BrandLORDWORLD

Ερωτήσεις για αυτό το προϊόν

How can I verify the board is communicating with all 253 SC or ST servos after wiring?

Power the board with 6-12 V matching the servo voltage, open the open-source web app via Wi-Fi or Bluetooth, and confirm each servo ID responds to test commands.

What ships with the expansion board and what must I source separately?

The board itself is supplied; you must provide a 6-12 V power supply, the SC or ST serial bus servos, and any mounting hardware.

Which servo series should I select to work with this driver?

Choose SC or ST series serial bus servos, as the board is designed specifically for those protocols and supports up to 253 units.

Επίσης σε αυτό το ράφι

Οι πελάτες σύγκριναν και αυτά

Ίδιο ράφι, ίδιο ταμείο — οκτώ νομίσματα και κλείδωμα ισοτιμίας 30 λεπτών.