Δεχόμαστε κρυπτονομίσματα — έτσι ώστε αυτά που κατέχετε να μπορούν να αγοράσουν πραγματικό εξοπλισμό.Πληρώστε σε κρυπτονομίσματα, ξοδέψτε τα σε πραγματικό εξοπλισμό. Δωρεάν ασφαλισμένη αποστολή παγκοσμίως άνω των 399 $. Ουδέτερες κούτες αποστολής, χωρίς σήμανση, από τη Γερμανία.Δωρεάν ασφαλισμένη αποστολή άνω των 399 $. Η ισοτιμία σας κλειδώνει για 30 λεπτά μόλις ανοίξει το ταμείο.Κλείδωμα ισοτιμίας 30 λεπτών. Κάθε προϊόν είναι σφραγισμένο, ελεγμένο ως προς τον σειριακό αριθμό του, και καλύπτεται από εγγύηση 24 μηνών.Σφραγισμένο, με εγγύηση 24 μηνών.

Παρακολουθούμενα είδη Σύνδεση
Small silver metal servo with two output shafts visible

LORDWORLD

LORDWORLD HX-06L Serial Bus Servo Double Shaft 6KG Torque

SKU CH-HCDR-JNSZH

Compact serial bus servo delivers 6 kg torque with dual-shaft output, built-in temperature, voltage and position feedback, plus 51, 32 and Raspberry Pi source code for clean-wiring robot joints

  • Precise joint control with temperature, voltage and position feedback
  • Stable operation from high-precision potentiometer
  • Clean wiring via dual connection ports
  • Burn protection through real-time feedback monitoring
  • Flexible use with servo and gear motor modes

Compact serial-bus servo for robot joints

The LORDWORLD HX-06L is a small, high-accuracy servo built for articulated robot projects. Its double-shaft design and full metal gear train deliver 6KG of torque for precise joint movement. Integrated feedback reports position, temperature and voltage to the host controller. Makers working with 51, STM32 or Raspberry Pi platforms can use the provided source code to accelerate development.

Dual-port wiring simplifies daisy-chained builds

Two connection ports allow clean, serial daisy-chaining so cable runs stay tidy inside tight chassis. The servo operates in either standard position mode or continuous gear-motor mode, letting one unit cover two motion roles. A high-precision potentiometer keeps output stable across repeated cycles. Builders who need absolute encoder resolution or CAN bus integration will need a different device.

On-board monitoring protects against overload

Real-time temperature and voltage telemetry lets the controller shut down or throttle the servo before heat damage occurs. Metal gears and dual shaft bearings dissipate mechanical stress without active cooling. The compact form factor fits narrow joint cavities where airflow is limited. Users planning sustained high-duty cycles should verify thermal limits in their specific enclosure.

Βασικά χαρακτηριστικά

  • Precise joint control with temperature, voltage and position feedback
  • Stable operation from high-precision potentiometer
  • Clean wiring via dual connection ports
  • Burn protection through real-time feedback monitoring
  • Flexible use with servo and gear motor modes

Προδιαγραφές

BrandLORDWORLD

Ερωτήσεις για αυτό το προϊόν

How much torque does the HX-06L deliver before it stalls under continuous load?

The servo is rated at 6KG torque, which is the limit reached first during sustained operation before internal protection activates.

Does the servo run hot or draw extra current when operated all day in robot joints?

Built-in temperature and voltage feedback lets the servo protect itself from overheating or burning during extended use.

Which controller boards can drive this servo using the supplied source code?

The package includes example code for 51, STM32, and Raspberry Pi platforms so you can start development immediately.

Επίσης σε αυτό το ράφι

Οι πελάτες σύγκριναν και αυτά

Ίδιο ράφι, ίδιο ταμείο — οκτώ νομίσματα και κλείδωμα ισοτιμίας 30 λεπτών.