Δεχόμαστε κρυπτονομίσματα — έτσι ώστε αυτά που κατέχετε να μπορούν να αγοράσουν πραγματικό εξοπλισμό.Πληρώστε σε κρυπτονομίσματα, ξοδέψτε τα σε πραγματικό εξοπλισμό. Δωρεάν ασφαλισμένη αποστολή παγκοσμίως άνω των 399 $. Ουδέτερες κούτες αποστολής, χωρίς σήμανση, από τη Γερμανία.Δωρεάν ασφαλισμένη αποστολή άνω των 399 $. Η ισοτιμία σας κλειδώνει για 30 λεπτά μόλις ανοίξει το ταμείο.Κλείδωμα ισοτιμίας 30 λεπτών. Κάθε προϊόν είναι σφραγισμένο, ελεγμένο ως προς τον σειριακό αριθμό του, και καλύπτεται από εγγύηση 24 μηνών.Σφραγισμένο, με εγγύηση 24 μηνών.

Παρακολουθούμενα είδη Σύνδεση
Green PCB with four white FFC connectors and a flat ribbon cable attached

LORDWORLD

LORDWORLD PCIe to 4-Channel HAT Adapter for Raspberry Pi 5 development board

SKU CH-PWEJ-DA5Q9

Expands the Raspberry Pi 5's single PCIe lane into four FFC connectors using a 16-pin cable, supports multi-HAT stacking, and runs at PCIe 2.0 speeds

  • Run four PCIe devices from one Pi 5 port
  • Stack multiple HATs to add storage or networking
  • PCIe Gen2 2.0 keeps bandwidth steady for each device
  • 16-pin flat cable connects instantly with no drivers
  • Compact board fits DIY NAS and AI accelerator builds

Four-Channel PCIe Expansion for Pi 5

This adapter splits the single PCIe interface on a Raspberry Pi 5 into four independent FFC connectors. It is aimed at developers, makers and engineers who need to attach multiple PCIe peripherals such as SSDs, network cards or capture devices to one board. The included 16-pin flat cable provides a direct plug-and-play link to the Pi 5's native port. Multi-HAT stacking is supported for modular system builds.

Gen2 Bandwidth Shared Across Four Lanes

The adapter operates at the PCIe 2.0 standard, so total throughput is limited to that generation's signalling rate. All four channels share the single upstream link from the Pi 5, meaning aggregate bandwidth cannot exceed the host port's capability. Devices that require higher-generation speeds will fall back to Gen2 rates, and simultaneous heavy traffic on multiple channels will contend for the same upstream capacity.

Four Devices Simultaneously, One Upstream Limit

The board comfortably handles four attached HATs or peripherals at once, enabling compact NAS, AI accelerator or multi-I/O projects. Headroom runs out when the combined data demand exceeds the single Gen2 upstream connection, so sustained high-throughput workloads on several devices will saturate the link. Projects needing more than four PCIe endpoints or dedicated bandwidth per device cannot be satisfied by this adapter alone.

Βασικά χαρακτηριστικά

  • Run four PCIe devices from one Pi 5 port
  • Stack multiple HATs to add storage or networking
  • PCIe Gen2 2.0 keeps bandwidth steady for each device
  • 16-pin flat cable connects instantly with no drivers
  • Compact board fits DIY NAS and AI accelerator builds

Προδιαγραφές

BrandLORDWORLD

Ερωτήσεις για αυτό το προϊόν

Should I pick a single HAT or plan for stacking multiple HATs on the 4-channel adapter?

The adapter provides four independent PCIe FFC connectors, so you can run one device or stack several HATs such as SSDs, network cards or capture devices at the same time.

What does the PCIe Gen2 2.0 label mean for actual throughput on a Raspberry Pi 5?

The link runs at the PCIe 2.0 rate, giving each connected device up to 5 GT/s raw bandwidth shared across the four channels.

Does the 16-pin flat cable limit which HATs I can attach?

The included 16-pin cable connects the Pi 5's native PCIe port to the adapter, and the four FFC connectors accept standard PCIe HATs without further restriction.

Επίσης σε αυτό το ράφι

Οι πελάτες σύγκριναν και αυτά

Ίδιο ράφι, ίδιο ταμείο — οκτώ νομίσματα και κλείδωμα ισοτιμίας 30 λεπτών.