Δεχόμαστε κρυπτονομίσματα — έτσι ώστε αυτά που κατέχετε να μπορούν να αγοράσουν πραγματικό εξοπλισμό.Πληρώστε σε κρυπτονομίσματα, ξοδέψτε τα σε πραγματικό εξοπλισμό. Δωρεάν ασφαλισμένη αποστολή παγκοσμίως άνω των 399 $. Ουδέτερες κούτες αποστολής, χωρίς σήμανση, από τη Γερμανία.Δωρεάν ασφαλισμένη αποστολή άνω των 399 $. Η ισοτιμία σας κλειδώνει για 30 λεπτά μόλις ανοίξει το ταμείο.Κλείδωμα ισοτιμίας 30 λεπτών. Κάθε προϊόν είναι σφραγισμένο, ελεγμένο ως προς τον σειριακό αριθμό του, και καλύπτεται από εγγύηση 24 μηνών.Σφραγισμένο, με εγγύηση 24 μηνών.

Παρακολουθούμενα είδη Σύνδεση
Green rectangular circuit board with pre-soldered header pins, breadboard and jumper wires attached

LORDWORLD

LORDWORLD RP2040 Development Board Pre-soldered Header Breadboard Wires

SKU CH-YFKA-RYNJV

RP2040 development board with dual-core Cortex M0+ at 133 MHz, 264 KB SRAM, 2 MB Flash, USB 1.1, pre-soldered headers plus breadboard and wires

  • Dual-core ARM Cortex M0+ processor runs up to 133 MHz
  • 264 KB SRAM plus 2 MB Flash memory provides ample project storage
  • USB 1.1 device and host support enables drag-and-drop programming
  • RP2040 microcontroller designed in the United Kingdom ensures proven architecture
  • Pre-soldered headers with breadboard and wires let you start prototyping immediately

RP2040 board with pre-soldered headers

The LORDWORLD development board uses the RP2040 microcontroller chip designed in the United Kingdom. A dual-core Arm Cortex M0+ processor runs at up to 133 MHz with 264KB of SRAM and 2MB of on-board Flash memory. Pre-soldered headers, a breadboard and wires are included for immediate prototyping.

Replaces bare modules needing solder work

The castellated module normally requires soldering to a carrier board before use. This version arrives with headers already fitted so you can plug straight into a breadboard. The jump is worth it when you want to start writing code instead of assembling hardware.

Fits USB 1.1 workflows and low-power projects

Drag-and-drop programming works over the USB 1.1 device port without extra tools. Accelerated floating-point libraries on-chip speed up math-heavy tasks. Low-power sleep and dormant modes help battery-operated designs run longer.

Βασικά χαρακτηριστικά

  • Dual-core ARM Cortex M0+ processor runs up to 133 MHz
  • 264 KB SRAM plus 2 MB Flash memory provides ample project storage
  • USB 1.1 device and host support enables drag-and-drop programming
  • RP2040 microcontroller designed in the United Kingdom ensures proven architecture
  • Pre-soldered headers with breadboard and wires let you start prototyping immediately

Προδιαγραφές

BrandLORDWORLD

Ερωτήσεις για αυτό το προϊόν

Does the castellated module require a specific carrier-board footprint?

The castellated edge lets you solder the module directly onto a custom carrier board; no special connector is needed beyond matching the pad layout.

What is the first step when setting up the board for drag-and-drop programming?

Hold the BOOTSEL button while plugging the USB 1.1 cable so the RP2040 appears as a mass-storage device, then copy the UF2 file.

Will the on-board 2 MB flash need replacing after many write cycles?

The 2 MB flash is soldered to the board and rated for typical microcontroller endurance; it is not user-replaceable.

Επίσης σε αυτό το ράφι

Οι πελάτες σύγκριναν και αυτά

Ίδιο ράφι, ίδιο ταμείο — οκτώ νομίσματα και κλείδωμα ισοτιμίας 30 λεπτών.