Δεχόμαστε κρυπτονομίσματα — έτσι ώστε αυτά που κατέχετε να μπορούν να αγοράσουν πραγματικό εξοπλισμό.Πληρώστε σε κρυπτονομίσματα, ξοδέψτε τα σε πραγματικό εξοπλισμό. Δωρεάν ασφαλισμένη αποστολή παγκοσμίως άνω των 399 $. Ουδέτερες κούτες αποστολής, χωρίς σήμανση, από τη Γερμανία.Δωρεάν ασφαλισμένη αποστολή άνω των 399 $. Η ισοτιμία σας κλειδώνει για 30 λεπτά μόλις ανοίξει το ταμείο.Κλείδωμα ισοτιμίας 30 λεπτών. Κάθε προϊόν είναι σφραγισμένο, ελεγμένο ως προς τον σειριακό αριθμό του, και καλύπτεται από εγγύηση 24 μηνών.Σφραγισμένο, με εγγύηση 24 μηνών.

Παρακολουθούμενα είδη Σύνδεση
Green circuit board with DB9 and terminal block connectors, rail-mount tabs visible

LORDWORLD

LORDWORLD RS232 to RS485 Converter (B) Isolated Development Board

SKU CH-FCZH-R53T6

An isolated RS232 to RS485 development board with onboard power isolation, digital signal isolation, TVS surge suppression up to 600W and resettable fuse protection

  • Isolated power supply built in, no external source needed
  • Digital signal isolation cuts noise and boosts reliability
  • TVS suppressor handles 600 W surges and static spikes
  • Resettable fuse with protection diodes guards against over-current and over-voltage
  • Converts RS232 to balanced differential RS485 for long-distance links

Isolated RS232-to-RS485 converter

The LORDWORLD RS232 to RS485 Converter (B) is an isolated development board that translates single-ended RS232 signals into balanced differential RS485 signals. It is built for engineers and system integrators who need reliable serial communication in electrically noisy industrial or IoT environments.

RS485 bus constraints and protection

The RS485 standard permits multi-drop wiring over long cable runs, but it remains vulnerable to ground loops, transient spikes and lightning-induced surges. This board addresses those limits with onboard unibody digital isolation, a transient voltage suppressor rated at 600W, a resettable fuse and protection diodes that clamp over-voltage and over-current events.

Integrated isolation removes external supply need

The single specification that decides fit is the unibody power-supply isolation, which generates a stable isolated voltage for the RS485 terminal without any auxiliary power source. Buyers who require a converter that draws its isolation power from the RS232 side itself will find this design suitable; those who need galvanic isolation powered from a separate rail will need a different topology.

Βασικά χαρακτηριστικά

  • Isolated power supply built in, no external source needed
  • Digital signal isolation cuts noise and boosts reliability
  • TVS suppressor handles 600 W surges and static spikes
  • Resettable fuse with protection diodes guards against over-current and over-voltage
  • Converts RS232 to balanced differential RS485 for long-distance links

Προδιαγραφές

BrandLORDWORLD

Ερωτήσεις για αυτό το προϊόν

Should I choose the RS232 to RS485 Converter (B) or another version?

This board is the (B) revision, offering onboard unibody power supply isolation and digital isolation so no extra power is needed for the isolated terminal.

What does the 600W lightningproof rating mean when the converter is installed in a real machine?

The onboard TVS and resettable fuse clamp transient spikes up to 600W, protecting the RS232 and RS485 ports from surge and electrostatic events.

Which interface standard does the converter use and what does it cap in practice?

It follows the RS232/RS485 standard, converting single-ended RS232 signals into balanced differential RS485 for longer, noise-resistant runs.

Επίσης σε αυτό το ράφι

Οι πελάτες σύγκριναν και αυτά

Ίδιο ράφι, ίδιο ταμείο — οκτώ νομίσματα και κλείδωμα ισοτιμίας 30 λεπτών.