NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Δεχόμαστε κρυπτονομίσματα — έτσι ώστε αυτά που κατέχετε να μπορούν να αγοράσουν πραγματικό εξοπλισμό.Πληρώστε σε κρυπτονομίσματα, ξοδέψτε τα σε πραγματικό εξοπλισμό. Δωρεάν ασφαλισμένη αποστολή παγκοσμίως άνω των 399 $. Ουδέτερες κούτες αποστολής, χωρίς σήμανση, από τη Γερμανία.Δωρεάν ασφαλισμένη αποστολή άνω των 399 $. Η ισοτιμία σας κλειδώνει για 30 λεπτά μόλις ανοίξει το ταμείο.Κλείδωμα ισοτιμίας 30 λεπτών. Κάθε προϊόν είναι σφραγισμένο, ελεγμένο ως προς τον σειριακό αριθμό του, και καλύπτεται από εγγύηση 24 μηνών.Σφραγισμένο, με εγγύηση 24 μηνών.
LORDWORLD
Development board with TCS34725FN color sensor, 16-bit RGBC channels, IR filter, I2C interface and 3.3/5V logic compatibility
The LORDWORLD TCS34725 development board integrates a TCS34725FN colour sensor with an embedded 16-bit ADC per channel and an IR-blocking filter. It communicates over I2C using few pins and includes a voltage-level translator for 3.3V or 5V logic. An onboard LED provides adjustable fill-light via PWM, making it suited for makers adding colour detection to microcontroller projects.
The embedded ADC delivers high sensitivity and wide dynamic range across sustained readings, while the IR-blocking filter keeps spectral response stable over time. Programmable upper and lower thresholds generate interrupt signals without polling overhead, and the LED brightness remains steady under PWM control during long measurement sessions. The board maintains reliable RGBC data without white-balance drift during extended operation.
Ensure your host controller can operate at 3.3V or 5V logic levels to match the onboard translator. Verify that your development environment has an I2C library compatible with the TCS34725 register set for RGBC data and interrupt handling. Confirm you can allocate two GPIO pins for the I2C bus and, if needed, a third pin for the interrupt line. Buyers needing multiple simultaneous colour channels should look elsewhere.
| Brand | LORDWORLD |
|---|
The board uses a low-power I2C colour sensor with an onboard LED that can be dimmed by PWM, so heat and current stay minimal during all-day operation.
A microcontroller or single-board computer with a 3.3 V or 5 V I2C bus and a matching supply rail is all that is required.
Yes, the onboard voltage level translator makes the sensor directly compatible with both 3.3 V and 5 V logic.
Επίσης σε αυτό το ράφι
Ίδιο ράφι, ίδιο ταμείο — οκτώ νομίσματα και κλείδωμα ισοτιμίας 30 λεπτών.
Το νόμισμα στο οποίο πληρώνετε, και αυτό στο οποίο βλέπετε τις τιμές.
Αποστέλλεται από το πορτοφόλι σας στο ταμείο
Μόνο για προβολή — ο κατάλογος αναγράφεται σε δολάρια
Κανένα νόμισμα δεν αντιστοιχεί.
Επιλέξτε τη γλώσσα στην οποία σας μιλάει ο ιστότοπος.
Πρώτη επίσκεψη;
Έχετε ήδη λογαριασμό;
Δεν υπάρχει αυτόματη επαναφορά κωδικού: αυτό το κατάστημα δεν στέλνει e-mail, άρα δεν υπάρχει σύνδεσμος μίας χρήσης να ζητήσετε. Αφήστε τη διεύθυνση στον λογαριασμό σας και κάποιος θα την επεξεργαστεί με το χέρι.
Το αίτημα καταχωρίστηκε
Δεν θα λάβετε τίποτα στα εισερχόμενά σας — το κατάστημα δεν στέλνει κανένα e-mail. Κάποιος το διαχειρίζεται με το χέρι.
Τον θυμηθήκατε;