Green circuit board with USB-C port and battery holder for Raspberry Pi Zero 2W

MCDODO

MCDODO X306 V1.5 5V UPS Expansion Board for Raspberry Pi Zero 2W

SKU CH-CTPG-CB8VB MPN X306

UPS expansion board adds 5.1 V 4000 mA battery backup to Raspberry Pi Zero 2W via USB-C power input

TypeSingle Board Computers

UPS backup up to 5.1 V 4000 mA for Zero 2 W
Enhanced V1.5 battery holder eases swaps and improves reliability
USB-C 5 V 3 A input with optional 20 W adapter
Compatible case X306-C1 and C296 heatsink available
Supplied with board and four M2.5 × 5 mm screws

48,99 $

0.00062701 BTC με τη σημερινή ισοτιμία

Διαθέσιμο · αποστολή σήμερα

Το ταμείο κλειδώνει την ισοτιμία σας για 30 λεπτά.

Παράδοση προς Ηνωμένες Πολιτείες εκτίμηση

UPS Worldwide Expedited 3–6 εργάσιμες ημέρες 39,90 $
DHL Express Worldwide 2–3 εργάσιμες ημέρες 74,90 $

Προσθέστε 350,01 $ ακόμη και η βασική αποστολή γίνεται δωρεάν.

Οι εισαγωγικοί δασμοί επιβάλλονται κατά την άφιξη από τη χώρα σας.

Αποστολή αλλού

Board purpose and target user

The X306 V1.5 expansion board adds an uninterruptible power supply function to a Raspberry Pi Zero 2 W. It accepts a single-cell battery and delivers backup power through a USB Type-C input rated at 5 V 3 A. Makers building portable or always-on Zero 2 W projects gain a compact UPS without redesigning their power circuitry.

Who it suits and who it does not

The board is designed exclusively for the Raspberry Pi Zero 2 W; earlier Zero or Zero W models are not supported. Builders who need a UPS for a different single-board computer or who require multi-cell battery capacity should look at other solutions. The matching X306-C1 case and C296 heatsink are optional accessories for this specific revision.

Deciding specification

Maximum backup output is 5.1 V at 4000 mA from a single-cell holder. If your Zero 2 W project demands more current or a different voltage rail, this board will not meet the requirement. The V1.5 revision (October 2025) upgrades the battery holder for easier installation and long-term reliability.

Βασικά χαρακτηριστικά

UPS backup up to 5.1 V 4000 mA for Zero 2 W
Enhanced V1.5 battery holder eases swaps and improves reliability
USB-C 5 V 3 A input with optional 20 W adapter
Compatible case X306-C1 and C296 heatsink available
Supplied with board and four M2.5 × 5 mm screws

Προδιαγραφές

Type	Single Board Computers

Ερωτήσεις για αυτό το προϊόν

What power input standard and voltage limit does the X306 V1.5 use?

The board accepts power through a USB Type-C 5V Power In port rated for 5Vdc ±5% at 3A, and it works with the Geekworm UL listed 20W 5V 4A USB Type-C adapter.

Which mounting hardware and case are specified for the X306 V1.5 board?

The packing list includes four M2.5 x 5mm screws for securing the Raspberry Pi Zero 2W, and the compatible case is the X306-C1 designed for the V1.3 and V1.5 revisions.

How is the battery installed on the X306 V1.5, and what mistake should be avoided?

The V1.5 revision features an enhanced single-cell battery holder for smoother insertion and removal; ensure the battery polarity matches the holder markings before seating it fully.

Επίσης σε αυτό το ράφι