BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
214,99 $
0.00278477BTC
Διαθέσιμο
Mellanox Technologies
Mellanox ConnectX-7 MCX755106AS-HEAT 200Gb expansion card
A half-height PCIe 5.0 x16 adapter with dual QSFP112 ports for 200 Gb/s InfiniBand and Ethernet connectivity
- Fits low-profile slots with 2.71 in half-height design
- Dual QSFP112 ports deliver 200 Gb/s InfiniBand and Ethernet
- PCIe 5.0 x16 interface provides 32 GT/s SerDes bandwidth
- Auto-negotiation across NDR200, HDR, EDR, FDR and SDR rates
- Secure Boot enabled with crypto disabled for trusted boot
Mellanox ConnectX-7 200Gb adapter card
The Mellanox ConnectX-7 MCX755106AS-HEAT is a half-height, half-length PCIe add-on card designed for high-performance networking. It targets data-centre and HPC builders who need 200Gb/s InfiniBand or Ethernet connectivity in a compact form factor.
PCIe 5.0 x16 interface with dual QSFP112 ports
The card operates on a PCI Express 5.0 x16 link at 32GT/s and is backward compatible with Gen 4.0 and 3.0 slots. Dual QSFP112 cages support InfiniBand NDR200, HDR, EDR, FDR and SDR as well as Ethernet rates from 200Gb/s down to 10Gb/s.
Half-height bracket frees full-height slots
Measuring 68.90mm by 167.65mm, the adapter fits low-profile chassis while leaving full-height expansion space available. An optional auxiliary PCIe x16 Gen 4.0 connection at 18GT/s can be added through a passive card and Cabline SA-II Plus harnesses for extended I/O.
Βασικά χαρακτηριστικά
- Fits low-profile slots with 2.71 in half-height design
- Dual QSFP112 ports deliver 200 Gb/s InfiniBand and Ethernet
- PCIe 5.0 x16 interface provides 32 GT/s SerDes bandwidth
- Auto-negotiation across NDR200, HDR, EDR, FDR and SDR rates
- Secure Boot enabled with crypto disabled for trusted boot
Προδιαγραφές
Δεν έχουν δημοσιευτεί ακόμη προδιαγραφές για αυτό το προϊόν.
Ερωτήσεις για αυτό το προϊόν
How do I install the half-height half-length MCX755106AS-HEAT card into a PCIe 5.0 x16 slot and what step is often missed?
Insert the 68.90 mm x 167.65 mm card into a Gen 5.0 x16 slot running at 32 GT/s; the step often missed is securing the low-profile bracket screw so the dual QSFP112 ports align with the chassis cutout.
What maintenance or replacement will the ConnectX-7 adapter need during its service life?
No field-replaceable parts are on the card; plan to replace the QSFP112 transceivers or direct-attach cables if link speeds change, and keep firmware current for InfiniBand NDR200 and Ethernet 200 Gb/s auto-negotiation.
Which limit appears first when the dual-port 200 Gb/s adapter runs sustained workloads?
The PCIe 5.0 x16 host interface at 32 GT/s per lane sets the ceiling; sustained bidirectional 200 Gb/s traffic can saturate that bus before the dual QSFP112 ports reach their line rate.
Επίσης σε αυτό το ράφι
Οι πελάτες σύγκριναν και αυτά
Ίδιο ράφι, ίδιο ταμείο — οκτώ νομίσματα και κλείδωμα ισοτιμίας 30 λεπτών.
