BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
214,99 $
0.00280457BTC
Διαθέσιμο
Mellanox Technologies
Mellanox Technologies MCX354A-FCBT ConnectX-3 VPI 40GbE 56Gb/s FDR IB PCIe 3.0 x8 Dual QSFP
Dual-port 40GbE and 56Gb/s FDR InfiniBand adapter with PCIe 3.0 x8 connectivity for high-performance servers
- Dual QSFP ports enable 40GbE and 56Gb/s FDR InfiniBand connectivity
- PCIe 3.0 x8 interface delivers high-throughput, low-latency data transfer
- ConnectX-3 VPI supports both Ethernet and InfiniBand on one adapter
- Hardware offload engines reduce CPU load for storage and compute workloads
- RoHS-6 compliant design meets environmental standards for data-centre deployment
ConnectX-3 VPI 40GbE Adapter
The Mellanox ConnectX-3 VPI adapter delivers 40GbE and 56Gb/s FDR InfiniBand connectivity through a PCIe 3.0 x8 interface. Dual QSFP ports enable high-throughput networking for enterprise data centres and high-performance computing clusters. Virtual Protocol Interconnect allows a single card to serve both Ethernet and InfiniBand fabrics. This new add-on card targets environments that demand low-latency, high-bandwidth interconnects.
Suited for clustered databases
This adapter fits servers running clustered databases, parallel processing, transactional services or embedded I/O applications where reduced completion time matters. It is not for desktop PCs or workstations lacking PCIe 3.0 x8 slots and QSFP cabling infrastructure. Buyers who need single-port connectivity or lower-speed Ethernet should evaluate other options.
Verify PCIe slot and fabric requirements
Confirm the host system provides an available PCIe 3.0 x8 slot with sufficient bracket space for a dual-port QSFP card. Ensure the target fabric uses 40GbE or 56Gb/s FDR InfiniBand and that compatible QSFP transceivers and cables are sourced separately. Check operating-system driver support for the ConnectX-3 VPI architecture before ordering.
Βασικά χαρακτηριστικά
- Dual QSFP ports enable 40GbE and 56Gb/s FDR InfiniBand connectivity
- PCIe 3.0 x8 interface delivers high-throughput, low-latency data transfer
- ConnectX-3 VPI supports both Ethernet and InfiniBand on one adapter
- Hardware offload engines reduce CPU load for storage and compute workloads
- RoHS-6 compliant design meets environmental standards for data-centre deployment
Προδιαγραφές
Δεν έχουν δημοσιευτεί ακόμη προδιαγραφές για αυτό το προϊόν.
Ερωτήσεις για αυτό το προϊόν
Will my server need a PCIe 3.0 x8 slot to install this ConnectX-3 card?
Yes, the adapter requires a PCIe 3.0 x8 slot running at 8 GT/s for full 40 GbE and 56 Gb/s FDR InfiniBand bandwidth.
Can I keep my older 10 GbE switches and cables when adding this dual-port QSFP adapter?
The card supports 10 GbE operation, so existing 10 GbE infrastructure will work; you only need compatible QSFP-to-SFP+ modules or direct-attach cables.
How can I verify both QSFP ports are linked at 40 GbE or 56 Gb/s after installation?
Check the adapter firmware or OS network tools — each port should report a 40 GbE or 56 Gb/s FDR InfiniBand link with active status LEDs on the bracket.
Επίσης σε αυτό το ράφι
Οι πελάτες σύγκριναν και αυτά
Ίδιο ράφι, ίδιο ταμείο — οκτώ νομίσματα και κλείδωμα ισοτιμίας 30 λεπτών.
