INITMMO 1200x300mm Magnetic Dust Filter 2-Pack Black
- INITMMO 2 x 1200*30…
- not_applicable
Δεχόμαστε κρυπτονομίσματα — έτσι ώστε αυτά που κατέχετε να μπορούν να αγοράσουν πραγματικό εξοπλισμό.Πληρώστε σε κρυπτονομίσματα, ξοδέψτε τα σε πραγματικό εξοπλισμό. Δωρεάν ασφαλισμένη αποστολή παγκοσμίως άνω των 399 $. Ουδέτερες κούτες αποστολής, χωρίς σήμανση, από τη Γερμανία.Δωρεάν ασφαλισμένη αποστολή άνω των 399 $. Η ισοτιμία σας κλειδώνει για 30 λεπτά μόλις ανοίξει το ταμείο.Κλείδωμα ισοτιμίας 30 λεπτών. Κάθε προϊόν είναι σφραγισμένο, ελεγμένο ως προς τον σειριακό αριθμό του, και καλύπτεται από εγγύηση 24 μηνών.Σφραγισμένο, με εγγύηση 24 μηνών.
Four magnetic 140 mm metal mesh filters block dust, cut noise and fit any standard case or PSU fan without tools
These magnetic mesh filters fit any standard 140 mm fan mounting points on a PC case or power supply. The ultra-fine PVC mesh blocks dust while allowing air to pass, and the magnetic frame attaches directly to a metal chassis without tools or screws. Each filter measures 5.51 by 5.51 by 0.08 inches and weighs 0.02 pounds. The pack contains four washable, reusable filters for intake and exhaust positions.
Magnetic mounting removes the need for screws, clips or sticky pads that can leave residue or vibrate over time. The jump is worth it when you want tool-free cleaning every couple of weeks — just pull the frame off, rinse with water and soap, and snap it back onto the steel panel. Do not bend the frame or put it in a washing machine; gentle hand washing keeps the mesh intact.
The filters only stay in place on ferromagnetic case panels or power-supply housings; aluminium, plastic or glass surfaces will not hold them. Mesh density is fixed at 1 mm hole size, so very fine particulate may still enter, and airflow restriction increases as dust builds up. Cleaning every few weeks maintains the balance between dust rejection and cooling performance.
| Brand | MoKo |
|---|---|
| Model | part_B07R4XZK52 |
| certification | true |
| features | 4PCS x 140*140mm |
| included | part_B07R4XZK52 |
| weight | 0.02 pounds |
| dimensions | 5.51 in x 5.51 in x 0.08 in |
| material | Metal |
The filter measures 5.51 in by 5.51 in and fits any standard 140 mm fan opening.
Place the frame against the metal surface; the built-in magnets hold it without tools or screws.
Clean every couple of weeks or when dust appears by gentle hand wash with water and soap; do not bend or machine wash.
Επίσης σε αυτό το ράφι
Ίδιο ράφι, ίδιο ταμείο — οκτώ νομίσματα και κλείδωμα ισοτιμίας 30 λεπτών.
Το νόμισμα στο οποίο πληρώνετε, και αυτό στο οποίο βλέπετε τις τιμές.
Αποστέλλεται από το πορτοφόλι σας στο ταμείο
Μόνο για προβολή — ο κατάλογος αναγράφεται σε δολάρια
Κανένα νόμισμα δεν αντιστοιχεί.
Επιλέξτε τη γλώσσα στην οποία σας μιλάει ο ιστότοπος.
Καμία γλώσσα δεν ταιριάζει.
Πρώτη επίσκεψη;
Έχετε ήδη λογαριασμό;
Δεν υπάρχει αυτόματη επαναφορά κωδικού: αυτό το κατάστημα δεν στέλνει e-mail, άρα δεν υπάρχει σύνδεσμος μίας χρήσης να ζητήσετε. Αφήστε τη διεύθυνση στον λογαριασμό σας και κάποιος θα την επεξεργαστεί με το χέρι.
Το αίτημα καταχωρίστηκε
Δεν θα λάβετε τίποτα στα εισερχόμενά σας — το κατάστημα δεν στέλνει κανένα e-mail. Κάποιος το διαχειρίζεται με το χέρι.
Τον θυμηθήκατε;