Δεχόμαστε κρυπτονομίσματα — έτσι ώστε αυτά που κατέχετε να μπορούν να αγοράσουν πραγματικό εξοπλισμό.Πληρώστε σε κρυπτονομίσματα, ξοδέψτε τα σε πραγματικό εξοπλισμό. Δωρεάν ασφαλισμένη αποστολή παγκοσμίως άνω των 399 $. Ουδέτερες κούτες αποστολής, χωρίς σήμανση, από τη Γερμανία.Δωρεάν ασφαλισμένη αποστολή άνω των 399 $. Η ισοτιμία σας κλειδώνει για 30 λεπτά μόλις ανοίξει το ταμείο.Κλείδωμα ισοτιμίας 30 λεπτών. Κάθε προϊόν είναι σφραγισμένο, ελεγμένο ως προς τον σειριακό αριθμό του, και καλύπτεται από εγγύηση 24 μηνών.Σφραγισμένο, με εγγύηση 24 μηνών.

Παρακολουθούμενα είδη Σύνδεση
Black C-clamp monitor arm with VESA plate, telescopic pole, tilt and swivel joints

MonMount

MonMount LCD500S Single Monitor Mount C-Clamp Black VESA 75/100 24" 20lbs

SKU CH-T40G-767AY

Single monitor C-clamp mount with 45° tilt and 180° swivel for screens up to 24″ and 20 lbs

  • TypeC Clamp Mount
  • ColorBlack
  • SpecificationsVESA 75/100
  • Features-> Max Screen Size: 24 " -> Tilt Angle: 45 Grades -> Swivel
  • Dimensions (H x W x D)18.000X5.250X3.750IN
  • Weight5.25
  • Fits screens up to 24 inches with 27 inch diagonal maximum
  • Supports monitors weighing up to 20 lbs or 10 kgs securely
  • C-clamp attaches firmly to desk edge without drilling holes
  • Adjusts tilt 45 degrees and swivel 180 degrees for optimal viewing
  • VESA 75 and 100 compatibility covers most standard monitors

Single C-Clamp Monitor Mount

The MonMount LCD500S is a black C-clamp arm designed for screens from 15 to 24 inches. It attaches to the rear lip of a desk and supports VESA 75/100 patterns. The mount holds displays up to 20 lbs and suits home or office workstations needing a compact, height-adjustable solution.

Tilt Swivel and Space Saving

The arm provides 45 degrees of tilt and 180 degrees of swivel for horizontal and vertical angle changes. A telescoping riser lets the screen turn like a steering wheel for planar adjustment. Removing the original stand frees desk surface area while keeping the display securely positioned.

Quick Desk Installation

The C-clamp fastens to the desk edge in minutes using the included hardware. VESA brackets attach to the monitor with standard screws matching the 75 or 100 mm pattern. Ensure the desk lip thickness suits the clamp opening and verify the screen weight stays within the 20 lb limit before mounting.

Βασικά χαρακτηριστικά

  • Fits screens up to 24 inches with 27 inch diagonal maximum
  • Supports monitors weighing up to 20 lbs or 10 kgs securely
  • C-clamp attaches firmly to desk edge without drilling holes
  • Adjusts tilt 45 degrees and swivel 180 degrees for optimal viewing
  • VESA 75 and 100 compatibility covers most standard monitors

Προδιαγραφές

BrandMonMount
ModelLCD500S
TypeC Clamp Mount
ColorBlack
SpecificationsVESA 75/100
Features-> Max Screen Size: 24 " -> Tilt Angle: 45 Grades -> Swivel Angle: 180 Grades
Dimensions (H x W x D)18.000X5.250X3.750IN
Weight5.25

Ερωτήσεις για αυτό το προϊόν

How often should I retighten the C-clamp and VESA 75/100 bolts on the LCD500S?

Check the C-clamp and VESA 75/100 bolts every few months; vibration from daily adjustments can loosen them, and a quick retighten keeps the 20 lb capacity secure.

What stops the arm from holding its position when I push a 24 inch screen to the full 180 degree swivel?

The gas-spring tension is calibrated for up to 20 lbs; at maximum 180 degree swivel a heavy panel near that limit may drift, so keep the display centred or add a counter-balance.

Does the black powder-coat finish on the LCD500S get hot after the monitor runs all day?

The steel frame stays near room temperature; only the attached monitor generates heat, and the open arm design lets air circulate freely around it.

Επίσης σε αυτό το ράφι

Οι πελάτες σύγκριναν και αυτά

Ίδιο ράφι, ίδιο ταμείο — οκτώ νομίσματα και κλείδωμα ισοτιμίας 30 λεπτών.