Δεχόμαστε κρυπτονομίσματα — έτσι ώστε αυτά που κατέχετε να μπορούν να αγοράσουν πραγματικό εξοπλισμό.Πληρώστε σε κρυπτονομίσματα, ξοδέψτε τα σε πραγματικό εξοπλισμό. Δωρεάν ασφαλισμένη αποστολή παγκοσμίως άνω των 399 $. Ουδέτερες κούτες αποστολής, χωρίς σήμανση, από τη Γερμανία.Δωρεάν ασφαλισμένη αποστολή άνω των 399 $. Η ισοτιμία σας κλειδώνει για 30 λεπτά μόλις ανοίξει το ταμείο.Κλείδωμα ισοτιμίας 30 λεπτών. Κάθε προϊόν είναι σφραγισμένο, ελεγμένο ως προς τον σειριακό αριθμό του, και καλύπτεται από εγγύηση 24 μηνών.Σφραγισμένο, με εγγύηση 24 μηνών.

Παρακολουθούμενα είδη Σύνδεση
Rectangular metal AT power supply unit, 21.5 by 11.5 by 5 centimetres, silver finish, indoor use only

myVolts

myVolts 12V 30A 360W AT Power Supply

SKU CH-1C14-C18Y1

A 360W AT switching supply delivering 12V at up to 30A with overload, over-voltage and short-circuit protection for indoor LED, CCTV or project use

  • TypeAT
  • Indoor-only design ensures safe operation in dry environments
  • Universal 100–240 V AC input works with global mains voltages
  • 12 V DC output delivers up to 30 A for high-current loads
  • 360 W nominal power supports demanding LED, CCTV and project builds
  • Overload, over-voltage and short-circuit protections safeguard connected equipment

Indoor 360W AT Power Supply

The myVolts 12V 30A AT power supply delivers 360W nominal output for indoor projects such as LED strip lighting, CCTV systems, radio equipment or computer builds. It accepts universal AC input from 100-120V or 200-240V and provides a regulated 12V DC output adjustable within ±10%. This unit is designed for fixed indoor installation only.

Metal enclosure with core protections

The metal chassis houses overload, over-voltage and short-circuit protection circuits that safeguard connected devices during fault conditions. A full load burn-in test is performed at the factory to verify reliability before shipment. Professional installation by a qualified electrician is highly recommended for safe operation.

AT form factor limits integration

The AT-type design measures 21.5 x 11.5 x 5cm and weighs 960g, requiring adequate space and mounting provisions inside a chassis or enclosure. Output voltage tolerance is held to ±1% under load, but the supply lacks waterproofing and must not be used outdoors or in damp environments. Input voltage selection covers 110V or 220V ranges with ±20% tolerance.

Βασικά χαρακτηριστικά

  • Indoor-only design ensures safe operation in dry environments
  • Universal 100–240 V AC input works with global mains voltages
  • 12 V DC output delivers up to 30 A for high-current loads
  • 360 W nominal power supports demanding LED, CCTV and project builds
  • Overload, over-voltage and short-circuit protections safeguard connected equipment

Προδιαγραφές

TypeAT

Ερωτήσεις για αυτό το προϊόν

Does the 12V 30A output require any periodic maintenance or component replacement?

The unit is a sealed switching supply with overload, over-voltage and short-circuit protection; no user-serviceable parts or scheduled maintenance are indicated.

What limits continuous operation at the full 360W rating?

The supply is rated for indoor use only and specifies a ±1% voltage tolerance at full load; sustained operation at 30A will be constrained by the enclosure's ability to dissipate heat without active cooling.

How much heat and noise should I expect when the unit runs all day at 30A?

The metal chassis measures 21.5 x 11.5 x 5 cm and weighs 960 g; with no fan mentioned, heat is dissipated passively, so the case will become warm and audible noise should be minimal.

Επίσης σε αυτό το ράφι

Οι πελάτες σύγκριναν και αυτά

Ίδιο ράφι, ίδιο ταμείο — οκτώ νομίσματα και κλείδωμα ισοτιμίας 30 λεπτών.