Δεχόμαστε κρυπτονομίσματα — έτσι ώστε αυτά που κατέχετε να μπορούν να αγοράσουν πραγματικό εξοπλισμό.Πληρώστε σε κρυπτονομίσματα, ξοδέψτε τα σε πραγματικό εξοπλισμό. Δωρεάν ασφαλισμένη αποστολή παγκοσμίως άνω των 399 $. Ουδέτερες κούτες αποστολής, χωρίς σήμανση, από τη Γερμανία.Δωρεάν ασφαλισμένη αποστολή άνω των 399 $. Η ισοτιμία σας κλειδώνει για 30 λεπτά μόλις ανοίξει το ταμείο.Κλείδωμα ισοτιμίας 30 λεπτών. Κάθε προϊόν είναι σφραγισμένο, ελεγμένο ως προς τον σειριακό αριθμό του, και καλύπτεται από εγγύηση 24 μηνών.Σφραγισμένο, με εγγύηση 24 μηνών.

Παρακολουθούμενα είδη Σύνδεση

myVolts

myVolts 12V 50A 600W AT Power Supply

SKU CH-WCZ4-69JTE

A 600 W AT switching supply delivering 12 V at up to 50 A from 110–264 V AC input with overload, over-voltage, over-current and short-circuit protection

  • TypeAT
  • Delivers 600 W at 12 V 50 A for demanding loads
  • Input auto-switches between 110 V and 264 V AC worldwide
  • Adjustable ±5 % output lets you fine-tune voltage
  • Over-voltage, over-current, over-temperature and short-circuit protection built in
  • CE and FCC certified after 48-hour burn-in test

600 W AT power supply for 12 V loads

This AT-format power supply converts AC input of 110 to 264 V into a regulated 12 V DC output rated at 50 A and 600 W. It is built for projects such as LED strips, CCTV systems, audio amplifiers and light-box billboards that need steady 12 V power.

Input range and efficiency limits

The unit accepts 95 to 126 V or 185 to 250 V AC at 50 to 60 Hz and delivers efficiency between 83 and 87 percent. Output voltage can be adjusted by ±5 percent, while line regulation stays within ±1 percent across the input span.

Replaces lower-wattage 12 V adapters

It supersedes smaller 12 V bricks when a project draws more current than they can supply continuously. The step up is justified when the load approaches 50 A or when over-voltage, overload, over-temperature and short-circuit protection are required for unattended operation.

Βασικά χαρακτηριστικά

  • Delivers 600 W at 12 V 50 A for demanding loads
  • Input auto-switches between 110 V and 264 V AC worldwide
  • Adjustable ±5 % output lets you fine-tune voltage
  • Over-voltage, over-current, over-temperature and short-circuit protection built in
  • CE and FCC certified after 48-hour burn-in test

Προδιαγραφές

TypeAT

Ερωτήσεις για αυτό το προϊόν

Should I pick the 12V 50A 600W unit or a lower-amperage model?

Choose this 12V 50A 600W unit if your load draws up to 50A; a lower-amperage model suits smaller LED strips or CCTV systems that need less current.

What does the 600W rating deliver in a real build?

It provides up to 600W of continuous DC power at 12V with efficiency between 83% and 87%, so the AC draw stays moderate while running LED lighting, amplifiers or similar 12V loads.

How does the AC 110-264V input range affect where I can use it?

The switchable 110-264V input lets you operate the supply on 95-126V or 185-250V mains worldwide without an external converter.

Επίσης σε αυτό το ράφι

Οι πελάτες σύγκριναν και αυτά

Ίδιο ράφι, ίδιο ταμείο — οκτώ νομίσματα και κλείδωμα ισοτιμίας 30 λεπτών.