Δεχόμαστε κρυπτονομίσματα — έτσι ώστε αυτά που κατέχετε να μπορούν να αγοράσουν πραγματικό εξοπλισμό.Πληρώστε σε κρυπτονομίσματα, ξοδέψτε τα σε πραγματικό εξοπλισμό. Δωρεάν ασφαλισμένη αποστολή παγκοσμίως άνω των 399 $. Ουδέτερες κούτες αποστολής, χωρίς σήμανση, από τη Γερμανία.Δωρεάν ασφαλισμένη αποστολή άνω των 399 $. Η ισοτιμία σας κλειδώνει για 30 λεπτά μόλις ανοίξει το ταμείο.Κλείδωμα ισοτιμίας 30 λεπτών. Κάθε προϊόν είναι σφραγισμένο, ελεγμένο ως προς τον σειριακό αριθμό του, και καλύπτεται από εγγύηση 24 μηνών.Σφραγισμένο, με εγγύηση 24 μηνών.

Παρακολουθούμενα είδη Σύνδεση
Black ABS AT power supply unit with integrated screwdriver for Slim 2100

myVolts

myVolts N16-160P1A power supply for Slim 2100

SKU CH-9NDG-748RW MPN N16-160P1A

Replacement AT power supply for Slim 2100 with 100-240 V input, 4.8 V 1.5 A and 12 V 13 A outputs, includes screwdriver

  • TypeAT
  • Designed for Slim 2100 systems for a precise fit
  • Input range 100-240V at 50/60Hz for worldwide use
  • Delivers 4.8V at 1.5A and 12V at 13A for stable operation
  • Includes screwdriver for quick, tool-free replacement
  • ABS enclosure resists wear and corrosion for lasting durability

Replacement power supply for Slim 2100

The myVolts N16-160P1A is a direct-replacement AT-type power supply built specifically for the Slim 2100 chassis. It accepts 100-240 V AC at 50/60 Hz and delivers DC outputs of 4.8 V at 1.5 A and 12 V at 13 A. The unit is designed to match the original mounting points and connector layout. Builders servicing other systems or needing different voltage rails should look elsewhere.

12 V 13 A and 4.8 V 1.5 A output capacity

The 12 V rail supplies up to 13 A for the main system load while the 4.8 V rail provides 1.5 A for auxiliary circuits. Together they cover the Slim 2100's standard power budget with stable output across the full 100-240 V input range. The supply will not support configurations that draw more current than these rated limits or that require additional voltage rails not present on this model.

Includes screwdriver for tool-free swap

A Phillips screwdriver is bundled so the old unit can be removed and the new one secured without hunting for tools. The ABS housing is fully sealed, wear-resistant and corrosion-resistant, making the assembly light and easy to handle during installation. No software, cables or adapters are included beyond the screwdriver.

Βασικά χαρακτηριστικά

  • Designed for Slim 2100 systems for a precise fit
  • Input range 100-240V at 50/60Hz for worldwide use
  • Delivers 4.8V at 1.5A and 12V at 13A for stable operation
  • Includes screwdriver for quick, tool-free replacement
  • ABS enclosure resists wear and corrosion for lasting durability

Προδιαγραφές

TypeAT

Ερωτήσεις για αυτό το προϊόν

Will the N16-160P1A fit the existing mounting points in my Slim 2100 chassis?

The supplier states accurate cuts and interfaces ensure perfect suitability for the mounting position, allowing direct removal of the old unit and replacement with the new one.

How can I verify the N16-160P1A is delivering the rated 12 V 13 A and 4.8 V 1.5 A outputs after installation?

Measure the DC output rails with a multimeter under load; stable readings at 12 V and 4.8 V confirm the supply is operating within its specified ratings.

Does the package include the screwdriver shown in the highlights, or must I provide my own?

The package list confirms one power supply and one screwdriver are included, so no separate tool purchase is required for the swap.

Επίσης σε αυτό το ράφι

Οι πελάτες σύγκριναν και αυτά

Ίδιο ράφι, ίδιο ταμείο — οκτώ νομίσματα και κλείδωμα ισοτιμίας 30 λεπτών.