Δεχόμαστε κρυπτονομίσματα — έτσι ώστε αυτά που κατέχετε να μπορούν να αγοράσουν πραγματικό εξοπλισμό.Πληρώστε σε κρυπτονομίσματα, ξοδέψτε τα σε πραγματικό εξοπλισμό. Δωρεάν ασφαλισμένη αποστολή παγκοσμίως άνω των 399 $. Ουδέτερες κούτες αποστολής, χωρίς σήμανση, από τη Γερμανία.Δωρεάν ασφαλισμένη αποστολή άνω των 399 $. Η ισοτιμία σας κλειδώνει για 30 λεπτά μόλις ανοίξει το ταμείο.Κλείδωμα ισοτιμίας 30 λεπτών. Κάθε προϊόν είναι σφραγισμένο, ελεγμένο ως προς τον σειριακό αριθμό του, και καλύπτεται από εγγύηση 24 μηνών.Σφραγισμένο, με εγγύηση 24 μηνών.

Παρακολουθούμενα είδη Σύνδεση
Small black ABS replacement PSU for PS4 Slim with four-pin connector

myVolts

myVolts N16-160P1A Wene Small Size Replacement Durable Practical power supply

SKU CH-8FCZ-1VXBR MPN N16-160P1A

Compact AT replacement power supply for PS4 Slim CUH-21XX consoles, delivering +12 V at 13 A and +4.8 V at 1.5 A from 100-240 V input

  • TypeAT
  • 4-pin AT connector fits CUH-21XX and CUH-2115 Slim consoles
  • 100-240 V 50/60 Hz input works worldwide without a converter
  • +12 V 13 A rail delivers stable power to GPU and CPU
  • Compact ABS housing installs in minutes with no tools required
  • Wear-resistant materials extend service life in daily gaming use

Replacement PSU for PS4 Slim

This myVolts N16-160P1A unit replaces the internal power supply in PS4 Slim consoles covering the CUH-21XX and CUH-2115 models. It accepts 100-240V input at 2.1A and 50/60Hz, then delivers +4.8V at 1.5A and +12V at 13A through a four-pin connector. The compact ABS housing fits the original mounting points for a direct swap.

Thermals and power draw

The sealed enclosure relies on the console’s internal airflow rather than an integrated fan, so noise stays at the level of the host system. Power conversion follows the rated 12V 13A rail and 4.8V 1.5A rail, drawing up to 2.1A from the mains at full load. No additional cooling or external wiring is required beyond the factory layout.

Upgrade context

This supply targets owners of a PS4 Slim whose original unit has failed or shows voltage instability. It restores stock power delivery without adding headroom for modified firmware or extra internal hardware. Builders needing higher wattage for custom cooling or upgraded storage should look elsewhere, as the output remains fixed at the factory specification.

Βασικά χαρακτηριστικά

  • 4-pin AT connector fits CUH-21XX and CUH-2115 Slim consoles
  • 100-240 V 50/60 Hz input works worldwide without a converter
  • +12 V 13 A rail delivers stable power to GPU and CPU
  • Compact ABS housing installs in minutes with no tools required
  • Wear-resistant materials extend service life in daily gaming use

Προδιαγραφές

TypeAT

Ερωτήσεις για αυτό το προϊόν

How do I install the N16-160P1A and what is the step people often get wrong?

Remove the old unit, align the four pins with the socket on the console motherboard, and press firmly until seated. The step often missed is confirming each pin is fully inserted before closing the case.

What maintenance or replacement will this power supply need later?

The sealed ABS enclosure has no user-serviceable parts. If the +12V 13A rail or +4.8V 1.5A rail drifts out of spec, replace the entire unit.

What limit appears first during sustained use on a CUH-2115 console?

The +12V 13A output rating is the first ceiling; continuous loads near that level will trigger thermal protection before the 100-240V 2.1A input limit is reached.

Επίσης σε αυτό το ράφι

Οι πελάτες σύγκριναν και αυτά

Ίδιο ράφι, ίδιο ταμείο — οκτώ νομίσματα και κλείδωμα ισοτιμίας 30 λεπτών.