Δεχόμαστε κρυπτονομίσματα — έτσι ώστε αυτά που κατέχετε να μπορούν να αγοράσουν πραγματικό εξοπλισμό.Πληρώστε σε κρυπτονομίσματα, ξοδέψτε τα σε πραγματικό εξοπλισμό. Δωρεάν ασφαλισμένη αποστολή παγκοσμίως άνω των 399 $. Ουδέτερες κούτες αποστολής, χωρίς σήμανση, από τη Γερμανία.Δωρεάν ασφαλισμένη αποστολή άνω των 399 $. Η ισοτιμία σας κλειδώνει για 30 λεπτά μόλις ανοίξει το ταμείο.Κλείδωμα ισοτιμίας 30 λεπτών. Κάθε προϊόν είναι σφραγισμένο, ελεγμένο ως προς τον σειριακό αριθμό του, και καλύπτεται από εγγύηση 24 μηνών.Σφραγισμένο, με εγγύηση 24 μηνών.

Παρακολουθούμενα είδη Σύνδεση
Flat 20cm PCIe x4 riser cable with 90-degree connector, gold contacts, foil shielding, flexible ribbon

myVolts

myVolts PCIe x4 Riser Cable 20cm 90° Upgrade

SKU CH-BR9K-S4T69

A PCIe x4 riser cable with a 90° connector, gold-plated contacts and EMI shielding for flexible GPU mounting up to PCIe 3.0

  • TypeAT
  • Vertical 90° connector simplifies GPU mounting in tight cases
  • Gold-plated contacts and quality solder points ensure reliable conductivity
  • Shielded 20 cm cable supports PCIe 3.0, 2.0 and 1.0 speeds
  • Flexible riser fits x1, x4, x8 and x16 slots for versatile builds
  • Rigid PCB with standoffs and EMI shielding reduces signal interference

What this cable does

This PCIe x4 riser cable extends a graphics card or add-in board by 20 centimetres and terminates in a 90-degree connector for vertical mounting. It is aimed at builders who need to reposition a GPU in a compact chassis or a custom loop where the motherboard slot is hard to reach.

Installation notes

The cable is flexible but the supplier warns against bending it sharply, as excessive curvature can degrade the signal and lead to a black screen or reduced frame rates. Gold-plated contacts and a rigid PCB with standoffs aid alignment, yet the 20-centimetre length must be verified against the case layout before purchase.

Sustained-load behaviour

The design is rated for PCIe 3.0, 2.0 and 1.0 speeds and does not support PCIe 4.0 signalling. Foiled conductors and EMI shielding are intended to preserve signal integrity during extended high-bandwidth transfers, so the link remains stable under continuous load rather than only in short bursts.

Βασικά χαρακτηριστικά

  • Vertical 90° connector simplifies GPU mounting in tight cases
  • Gold-plated contacts and quality solder points ensure reliable conductivity
  • Shielded 20 cm cable supports PCIe 3.0, 2.0 and 1.0 speeds
  • Flexible riser fits x1, x4, x8 and x16 slots for versatile builds
  • Rigid PCB with standoffs and EMI shielding reduces signal interference

Προδιαγραφές

TypeAT

Ερωτήσεις για αυτό το προϊόν

How can I confirm the 90° riser cable is functioning correctly after installation?

The system should POST and detect the GPU at the expected PCIe 3.0, 2.0 or 1.0 link speed without black-screen or low-FPS symptoms.

What comes in the box and what must I source separately?

The package includes the 20 cm PCIe x4 riser cable with a 90° connector, rigid PCB and standoffs; you must provide the graphics card, motherboard and any mounting hardware.

Which PCIe version should I select for this 20 cm 90° riser?

The cable supports PCIe 3.0, 2.0 and 1.0; it does not support PCIe 4.0, so choose a 3.0-or-lower link for reliable operation.

Επίσης σε αυτό το ράφι

Οι πελάτες σύγκριναν και αυτά

Ίδιο ράφι, ίδιο ταμείο — οκτώ νομίσματα και κλείδωμα ισοτιμίας 30 λεπτών.