Δεχόμαστε κρυπτονομίσματα — έτσι ώστε αυτά που κατέχετε να μπορούν να αγοράσουν πραγματικό εξοπλισμό.Πληρώστε σε κρυπτονομίσματα, ξοδέψτε τα σε πραγματικό εξοπλισμό. Δωρεάν ασφαλισμένη αποστολή παγκοσμίως άνω των 399 $. Ουδέτερες κούτες αποστολής, χωρίς σήμανση, από τη Γερμανία.Δωρεάν ασφαλισμένη αποστολή άνω των 399 $. Η ισοτιμία σας κλειδώνει για 30 λεπτά μόλις ανοίξει το ταμείο.Κλείδωμα ισοτιμίας 30 λεπτών. Κάθε προϊόν είναι σφραγισμένο, ελεγμένο ως προς τον σειριακό αριθμό του, και καλύπτεται από εγγύηση 24 μηνών.Σφραγισμένο, με εγγύηση 24 μηνών.

Παρακολουθούμενα είδη Σύνδεση
Rectangular metal power supply, silver finish, 21.5 by 11.3 by 4.8 cm

myVolts

myVolts Power Supply 48V 12.5A AC110-260V

SKU CH-ZD3H-9RMHP

A 48V 12.5A switching supply for stepping motor drivers with AC110-260V input and overload protection

  • TypeAT
  • Delivers 48 V DC at 12.5 A for stepping motor drivers
  • Accepts AC 110–260 V input for worldwide mains compatibility
  • Includes over-voltage, overload, overheat and short-circuit protection for safe operation
  • Compact 21.5 × 11.3 × 4.8 cm enclosure weighs only 807 g
  • Single-phase switching design built with high-performance transformers and dual electrolytic capacitors

Stepping Motor Power Supply

This myVolts unit converts AC mains into a stable DC 48 V 12.5 A output designed for stepping motor drivers. It accepts a single-phase input between 110 V and 260 V and includes over-voltage, overload, overheat and short-circuit protection. The compact enclosure measures 21.5 cm by 11.3 cm by 4.8 cm and weighs approximately 807 g.

Check Mains and Load Compatibility

Verify that your local supply voltage falls within the 110 V to 260 V AC range and that the motor driver requires exactly 48 V DC at up to 12.5 A. The supply is single-phase only and has an AT form factor, so confirm your wiring and mounting arrangement match those constraints before ordering.

Included Hardware

The package contains one power supply unit and no additional cables, connectors or software. Because nothing else is bundled, you must provide any required AC input cord, DC output wiring and mounting hardware separately.

Βασικά χαρακτηριστικά

  • Delivers 48 V DC at 12.5 A for stepping motor drivers
  • Accepts AC 110–260 V input for worldwide mains compatibility
  • Includes over-voltage, overload, overheat and short-circuit protection for safe operation
  • Compact 21.5 × 11.3 × 4.8 cm enclosure weighs only 807 g
  • Single-phase switching design built with high-performance transformers and dual electrolytic capacitors

Προδιαγραφές

TypeAT

Ερωτήσεις για αυτό το προϊόν

Does the power supply ship with mounting brackets, cables or any accessories beyond the unit itself?

Only the power supply is included; mounting hardware, AC cord and DC leads must be sourced separately.

I need 48 V for a stepper driver — is the 12.5 A version the only option or are lower-current models available?

The listed unit delivers 12.5 A at 48 V; no other current ratings are mentioned for this model.

What does the 12.5 A rating mean when the supply is driving a stepper motor in practice?

It provides up to 12.5 A continuous at 48 V with over-voltage, overload, overheat and short-circuit protection for stepper motor drivers.

Επίσης σε αυτό το ράφι

Οι πελάτες σύγκριναν και αυτά

Ίδιο ράφι, ίδιο ταμείο — οκτώ νομίσματα και κλείδωμα ισοτιμίας 30 λεπτών.