Δεχόμαστε κρυπτονομίσματα — έτσι ώστε αυτά που κατέχετε να μπορούν να αγοράσουν πραγματικό εξοπλισμό.Πληρώστε σε κρυπτονομίσματα, ξοδέψτε τα σε πραγματικό εξοπλισμό. Δωρεάν ασφαλισμένη αποστολή παγκοσμίως άνω των 399 $. Ουδέτερες κούτες αποστολής, χωρίς σήμανση, από τη Γερμανία.Δωρεάν ασφαλισμένη αποστολή άνω των 399 $. Η ισοτιμία σας κλειδώνει για 30 λεπτά μόλις ανοίξει το ταμείο.Κλείδωμα ισοτιμίας 30 λεπτών. Κάθε προϊόν είναι σφραγισμένο, ελεγμένο ως προς τον σειριακό αριθμό του, και καλύπτεται από εγγύηση 24 μηνών.Σφραγισμένο, με εγγύηση 24 μηνών.

Παρακολουθούμενα είδη Σύνδεση

myVolts

myVolts S-350-12v 300W 5V 60A AT power supply

SKU CH-HP3N-K1FGE

A 300W AT switching power supply delivering 5V at 60A with overload, overvoltage, short-circuit and over-temperature protection

  • TypeAT
  • Multiple safety protections guard against faults
  • All-copper transformer with honeycomb design resists heat buildup
  • Built-in fan and LED indicator aid cooling and status checks
  • Compact 215x115x50 mm form factor saves installation space
  • Wide 100-120 V / 200-260 V AC input suits global use

Universal 5 V 300 W AT supply

This AT-form-factor switching unit delivers a regulated 5 V output at up to 60 A for 300 W total power. It accepts 100-120 V or 200-260 V AC input, making it suitable for worldwide bench use. Built-in protections cover short circuit, overload, overvoltage, over-temperature and inrush current. A forced-air fan and honeycomb copper transformer keep temperatures low during continuous operation.

60 A headroom for dense 5 V loads

The 60 A rating comfortably runs multiple CCTV cameras, radio transceivers or microcontroller arrays from a single rail. Voltage regulation stays tight while the fan spins at 4500-5000 rpm to move air through the vented alloy chassis. Headroom disappears when the combined draw approaches 300 W; sustained loads above that trip the overload guard and shut the output down.

Replaces bulky linear transformers

The 215 x 115 x 50 mm enclosure is far smaller than equivalent iron-core units, freeing rack or cabinet space. Swapping a legacy linear supply for this switcher cuts weight and heat while adding the full protection suite. The upgrade pays off when the installation needs quiet, fan-cooled operation and automatic fault recovery without manual fuse changes.

Βασικά χαρακτηριστικά

  • Multiple safety protections guard against faults
  • All-copper transformer with honeycomb design resists heat buildup
  • Built-in fan and LED indicator aid cooling and status checks
  • Compact 215x115x50 mm form factor saves installation space
  • Wide 100-120 V / 200-260 V AC input suits global use

Προδιαγραφές

TypeAT

Ερωτήσεις για αυτό το προϊόν

Will this 5 V 60 A unit power legacy AT motherboards and drives without adapters?

It is an AT-type supply delivering 5 V at 60 A with 300 W total output, matching the voltage and connector style used by older AT systems.

How can I confirm the supply is operating correctly once installed?

The built-in LED power indicator lights when the unit is on, and the fan spins at 4500–5000 rpm to show active cooling.

What comes in the box and what must I source separately?

The package includes one power supply measuring 215 × 115 × 50 mm; mounting screws, AC power cord and any AT-to-ATX adapters are not included.

Επίσης σε αυτό το ράφι

Οι πελάτες σύγκριναν και αυτά

Ίδιο ράφι, ίδιο ταμείο — οκτώ νομίσματα και κλείδωμα ισοτιμίας 30 λεπτών.