Δεχόμαστε κρυπτονομίσματα — έτσι ώστε αυτά που κατέχετε να μπορούν να αγοράσουν πραγματικό εξοπλισμό.Πληρώστε σε κρυπτονομίσματα, ξοδέψτε τα σε πραγματικό εξοπλισμό. Δωρεάν ασφαλισμένη αποστολή παγκοσμίως άνω των 399 $. Ουδέτερες κούτες αποστολής, χωρίς σήμανση, από τη Γερμανία.Δωρεάν ασφαλισμένη αποστολή άνω των 399 $. Η ισοτιμία σας κλειδώνει για 30 λεπτά μόλις ανοίξει το ταμείο.Κλείδωμα ισοτιμίας 30 λεπτών. Κάθε προϊόν είναι σφραγισμένο, ελεγμένο ως προς τον σειριακό αριθμό του, και καλύπτεται από εγγύηση 24 μηνών.Σφραγισμένο, με εγγύηση 24 μηνών.

Παρακολουθούμενα είδη Σύνδεση

myVolts

myVolts S-50-24 Security Monitoring Switching Power Supply 2.1A for Factory for Switching for Power

SKU CH-RQ9M-SHNEE MPN S-50-24

Delivers 24 V at up to 2.1 A (50.4 W) from 85–264 V AC input with 86 % efficiency and ±1 % regulation

  • TypeAT
  • Easy installation with simple wiring for quick setup
  • Safe operation via copper coil transformer design
  • Reliable performance from copper coil construction
  • Strong output using filter magnetic ring capacitor
  • 4 W DC power at 24 V and 2.1 A

Industrial DC Power Supply for Security

The myVolts S-50-24 is a 24V switching power supply rated at 2.1A and 50.4W. It is built for security monitoring, PLC control systems, industrial control and transportation facilities that need a compact DC source.

Simple Wiring and Selectable AC Input

Installation uses simple wiring with a copper coil transformer for safe connection. The AC input range is selectable by switch between 85-132VAC and 170-264VAC at 47-63Hz, also accepting 240-370VDC. Cold start inrush reaches 45A at 230V and leakage stays below 2mA at 240VAC.

50.4W Output with ±10% Voltage Adjustment

The unit delivers 0-2.1A at 24V with ±1% voltage accuracy and 200mVp-p ripple. Inlet and load stability are each ±0.5% and efficiency is 86%. The adjustable range of ±10% on the DC voltage gives some headroom, while the 2.1A limit defines the maximum load.

Βασικά χαρακτηριστικά

  • Easy installation with simple wiring for quick setup
  • Safe operation via copper coil transformer design
  • Reliable performance from copper coil construction
  • Strong output using filter magnetic ring capacitor
  • 4 W DC power at 24 V and 2.1 A

Προδιαγραφές

TypeAT

Ερωτήσεις για αυτό το προϊόν

How do I confirm the S-50-24 is delivering the correct 24V output after installation?

Measure the DC output with a multimeter; it should read 24V within the ±1% tolerance under load.

What comes in the box with the S-50-24 and what must be sourced separately?

The unit includes the switching power supply with copper coil transformer and filter magnetic ring capacitor; AC input cable and DC output wiring are not included.

Which AC input voltage setting should I select on the S-50-24 for a 230VAC mains supply?

Set the selector switch to the 170-264VAC range for 230VAC operation; the unit will draw 0.65A at that voltage.

Επίσης σε αυτό το ράφι

Οι πελάτες σύγκριναν και αυτά

Ίδιο ράφι, ίδιο ταμείο — οκτώ νομίσματα και κλείδωμα ισοτιμίας 30 λεπτών.