Δεχόμαστε κρυπτονομίσματα — έτσι ώστε αυτά που κατέχετε να μπορούν να αγοράσουν πραγματικό εξοπλισμό.Πληρώστε σε κρυπτονομίσματα, ξοδέψτε τα σε πραγματικό εξοπλισμό. Δωρεάν ασφαλισμένη αποστολή παγκοσμίως άνω των 399 $. Ουδέτερες κούτες αποστολής, χωρίς σήμανση, από τη Γερμανία.Δωρεάν ασφαλισμένη αποστολή άνω των 399 $. Η ισοτιμία σας κλειδώνει για 30 λεπτά μόλις ανοίξει το ταμείο.Κλείδωμα ισοτιμίας 30 λεπτών. Κάθε προϊόν είναι σφραγισμένο, ελεγμένο ως προς τον σειριακό αριθμό του, και καλύπτεται από εγγύηση 24 μηνών.Σφραγισμένο, με εγγύηση 24 μηνών.

Παρακολουθούμενα είδη Σύνδεση
Pink aluminium AT power supply unit with screw terminals

myVolts

myVolts S-500-24 24V 20.8A 500W AT Power Supply Pink

SKU CH-KN95-G6R19

A 500 W AT power supply delivering 24 V at 20.8 A with overload, overvoltage and short-circuit protection

  • TypeAT
  • High efficiency with low DC ripple for stable output
  • circuit, overload and overvoltage protection built in
  • Operates from 0 °C to 40 °C for long service life
  • 100 % full-load burn-in test ensures reliable operation
  • CCC, FCC and CE safety compliance certified

500 W AT Power Supply for 24 V Systems

The myVolts S-500-24 is an AT form-factor switch-mode supply that delivers 24 V at 20.8 A for a continuous 500 W output. It accepts AC input from 110 V or 220 V with a ±15 % tolerance, making it suitable for industrial automation, LED displays, CCTV and 3D printer installations. The aluminium-alloy chassis provides structural rigidity and acts as the primary thermal path. Built-in short-circuit, overload and overvoltage protection guards connected equipment.

Sustained 500 W Output with Low Ripple

The unit is specified for 100 % total-load burning tests, confirming it can maintain its full 500 W rating continuously rather than only in short bursts. Low DC ripple on the 24 V rail ensures stable power for sensitive electronics such as radio gear or precision LED drivers. Adjustable output via the +V/ADJ terminal allows fine-tuning within the design window. Efficiency remains high across the load range, limiting waste heat during extended operation.

Fanless Cooling from 0 °C to 40 °C

Natural convection through the aluminium alloy enclosure keeps the supply silent in normal use, with an operating temperature range of 0 °C to 40 °C and storage tolerance down to -20 °C. Humidity tolerance reaches 95 % non-condensing for damp environments. CCC, FCC and CE safety compliance marks confirm insulation strength and electromagnetic compatibility. The fanless design eliminates bearing wear and reduces long-term maintenance in 24/7 deployments.

Βασικά χαρακτηριστικά

  • High efficiency with low DC ripple for stable output
  • circuit, overload and overvoltage protection built in
  • Operates from 0 °C to 40 °C for long service life
  • 100 % full-load burn-in test ensures reliable operation
  • CCC, FCC and CE safety compliance certified

Προδιαγραφές

TypeAT

Ερωτήσεις για αυτό το προϊόν

How much heat does the 500 W unit produce when running continuously at full load?

It operates from 0 to 40 °C with natural convection cooling and an aluminium alloy case that dissipates heat without a fan.

Which cables or connectors must I already have to wire the AC input and DC output terminals?

You need ring or fork terminals for the L, N, GND and V screw terminals, plus a small screwdriver for the voltage-adjust potentiometer.

Will this AT-form-factor supply fit alongside older AT motherboards and drives in the same chassis?

The 85 x 58 x 33 mm footprint matches the S-48-24 reference size, so it occupies the same mounting space as many legacy AT units.

Επίσης σε αυτό το ράφι

Οι πελάτες σύγκριναν και αυτά

Ίδιο ράφι, ίδιο ταμείο — οκτώ νομίσματα και κλείδωμα ισοτιμίας 30 λεπτών.