BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
214,99 $
0.00277553BTC
Διαθέσιμο
myVolts
myVolts Slimline 300 W AT Power Supply for Hipro HP-G2207F3, HP-G251GF3, Rev 02
300 W AT power supply with 20+4 pin, P4, Molex, SATA and floppy connectors for Hipro HP-G2207F3, HP-G251GF3 and Rev 02 models
- TypeAT
- 300 W capacity supports extra components
- TFX form factor fits slimline desktops
- 20+4 pin main connector works with 20 or 24 pin boards
- 40 mm ball-bearing fan with thermal speed control
- Direct replacement for Hipro HP-G2207F3 and HP-G251GF3 Rev 02
Slimline 300 W AT Power Supply
This 300 watt AT power supply is built for slimline desktop computers that use the Hipro HP-G2207F3, HP-G251GF3 or Rev 02 units. It delivers more headroom than lower wattage originals so extra drives or cards can be added.
TFX form factor with internal 40 mm ball-bearing fan
The compact TFX design fits small cases while the 40 millimetre ball-bearing fan uses thermal speed control to manage heat and noise. Connectors include a 20+4 pin main connector that works with 20 or 24 pin motherboards, a 4 pin 12 V P4 connector, three 4 pin Molex connectors, three SATA connectors and a floppy connector.
Check your current unit matches the Hipro models
Verify the existing power supply is one of the three Hipro part numbers above and that your case accepts a TFX sized unit. Confirm the 20+4 pin main connector and 4 pin 12 V connector match the motherboard headers you have.
Βασικά χαρακτηριστικά
- 300 W capacity supports extra components
- TFX form factor fits slimline desktops
- 20+4 pin main connector works with 20 or 24 pin boards
- 40 mm ball-bearing fan with thermal speed control
- Direct replacement for Hipro HP-G2207F3 and HP-G251GF3 Rev 02
Προδιαγραφές
| Type | AT |
|---|
Ερωτήσεις για αυτό το προϊόν
What AT connector standard does this 300 W unit use and what motherboard pin counts does it support?
It uses the AT standard with a 20+4 pin main connector that works with both 20 pin and 24 pin motherboard sockets.
What physical form factor must my case accept for this supply to fit?
The supply is designed for the TFX form factor used in slimline desktop cases.
How do I install the supply and which connector step is often missed?
Mount the unit in the TFX bay, secure it with screws, then attach the 20+4 pin main connector, the 4 pin P4 12V connector, three SATA connectors, three Molex connectors and the floppy connector; the 4 pin P4 12V connector is the one most often overlooked.
Επίσης σε αυτό το ράφι
Οι πελάτες σύγκριναν και αυτά
Ίδιο ράφι, ίδιο ταμείο — οκτώ νομίσματα και κλείδωμα ισοτιμίας 30 λεπτών.
