Δεχόμαστε κρυπτονομίσματα — έτσι ώστε αυτά που κατέχετε να μπορούν να αγοράσουν πραγματικό εξοπλισμό.Πληρώστε σε κρυπτονομίσματα, ξοδέψτε τα σε πραγματικό εξοπλισμό. Δωρεάν ασφαλισμένη αποστολή παγκοσμίως άνω των 399 $. Ουδέτερες κούτες αποστολής, χωρίς σήμανση, από τη Γερμανία.Δωρεάν ασφαλισμένη αποστολή άνω των 399 $. Η ισοτιμία σας κλειδώνει για 30 λεπτά μόλις ανοίξει το ταμείο.Κλείδωμα ισοτιμίας 30 λεπτών. Κάθε προϊόν είναι σφραγισμένο, ελεγμένο ως προς τον σειριακό αριθμό του, και καλύπτεται από εγγύηση 24 μηνών.Σφραγισμένο, με εγγύηση 24 μηνών.

Παρακολουθούμενα είδη Σύνδεση
Five green ATX 24-pin adapter boards with switches

myVolts

myVolts XH-M229 ATX 24-pin adapter board 5-pack

SKU CH-987Z-70HPM

A five-pack of ATX 24-pin adapter boards with an integrated switch and four separate voltage outputs for desktop chassis power supply testing

  • TypeAT
  • Built-in overcharge, over-discharge and overcurrent protection safeguards connected devices
  • Automatic charging cut-off stops power delivery once full to prevent overcharging
  • Stable voltage and current output protects sensitive components from damage
  • Four independent voltage rails provide flexible power distribution for testing
  • Compact 12.8 × 4.8 cm board fits tight chassis spaces easily

Five-pack ATX adapter boards

The myVolts XH-M229 modules convert a standard 24-pin ATX connector into four separate voltage outputs. Each board includes an integrated switch and protection against over-charge, over-discharge and over-current. The pack supplies five identical units for bench testing or multi-system builds.

Simple bench installation

Plug the 24-pin header onto the motherboard power socket and flip the onboard switch to enable output. The boards are compatible with ATX and partial BTX layouts, but the 5.04-inch length may interfere with adjacent components in tight chassis. Verify clearance before closing the case.

Check connector and space

Ensure your power supply uses a standard 24-pin ATX plug and that the 12.8 cm by 4.8 cm footprint fits the available area. The modules provide four voltage rails; confirm your load matches those outputs. No mounting hardware is included.

Βασικά χαρακτηριστικά

  • Built-in overcharge, over-discharge and overcurrent protection safeguards connected devices
  • Automatic charging cut-off stops power delivery once full to prevent overcharging
  • Stable voltage and current output protects sensitive components from damage
  • Four independent voltage rails provide flexible power distribution for testing
  • Compact 12.8 × 4.8 cm board fits tight chassis spaces easily

Προδιαγραφές

TypeAT

Ερωτήσεις για αυτό το προϊόν

How can I verify the XH-M229 adapter board is working correctly after connecting it to my ATX 24-pin power supply?

Connect the board to the PSU and flip the onboard switch; the four voltage output sets should deliver stable power to attached devices, and the protection functions will halt output if a fault occurs.

What comes in the package and are any extra cables or connectors required?

The box contains five XH-M229 24-pin ATX adapter boards measuring 12.8 by 4.8 cm; no additional cables or connectors are included.

The listing shows a single version — how do I choose the right capacity for my build?

Only one model, the XH-M229 with four voltage outputs and a 24-pin ATX interface, is supplied; select this version if your chassis uses a standard ATX 24-pin connector.

Επίσης σε αυτό το ράφι

Οι πελάτες σύγκριναν και αυτά

Ίδιο ράφι, ίδιο ταμείο — οκτώ νομίσματα και κλείδωμα ισοτιμίας 30 λεπτών.