Two green DDR5 RDIMM modules with black chips and gold contacts, no heat spreader

NEMIX RAM

NEMIX RAM 128GB (2x64GB) DDR5 4800 CL40 ECC RDIMM SuperMicro Compatible memory upgrade

SKU CH-7SZ6-QAKMD

128 GB DDR5 4800 ECC registered server kit in two 64 GB modules at CL40 and 1.1 V for SuperMicro X13SEW boards

Capacity128GB (2 x 64GB)
SpeedDDR5 4800 (PC5 38400)
ECCYes
Buffered/RegisteredRegistered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.10V

128 GB capacity across two 64 GB modules for high-density server workloads
DDR5 4800 speed with PC5-38400 bandwidth handles intensive data throughput
ECC registered design detects and corrects errors to protect critical data integrity
1 V operation reduces power draw in dense memory configurations
Validated for SuperMicro X13SEW-TF and X13SEW-F motherboards ensuring drop-in compatibility

3.199,99 $

0.04131845 BTC με τη σημερινή ισοτιμία

Διαθέσιμο · αποστολή σήμερα

Το ταμείο κλειδώνει την ισοτιμία σας για 30 λεπτά.

Παράδοση προς Ηνωμένες Πολιτείες εκτίμηση

UPS Worldwide Expedited 3–6 εργάσιμες ημέρες Δωρεάν
DHL Express Worldwide 2–3 εργάσιμες ημέρες 74,90 $

Οι εισαγωγικοί δασμοί επιβάλλονται κατά την άφιξη από τη χώρα σας.

Αποστολή αλλού

System-specific DDR5 ECC RDIMM kit

This 128GB kit contains two 64GB registered DIMMs built for SuperMicro server and workstation platforms. It targets administrators who need validated ECC memory for mission-critical workloads on compatible X13SEW motherboards.

DDR5 4800 CL40 registered specification

The modules run at 4800 MT/s with CAS latency 40 at 1.1V using a 2Rx4 organisation. ECC and registered buffering are mandatory for the supported platforms, so this exact combination decides whether the kit will post and operate without errors.

Straightforward DIMM installation

Installation follows the standard 288-pin DDR5 keyed slot procedure and usually takes minutes. The most common issue is mixing registered ECC RDIMMs with unbuffered or non-ECC modules, which prevents the system from booting.

Βασικά χαρακτηριστικά

128 GB capacity across two 64 GB modules for high-density server workloads
DDR5 4800 speed with PC5-38400 bandwidth handles intensive data throughput
ECC registered design detects and corrects errors to protect critical data integrity
1 V operation reduces power draw in dense memory configurations
Validated for SuperMicro X13SEW-TF and X13SEW-F motherboards ensuring drop-in compatibility

Προδιαγραφές

Brand	NEMIX RAM
Series	SuperMicro Server/Workstation Compatible Series Memory
Model	SuperMicro DDR5 4800MHZ ECC RDIMM Registered Server Memory
Part Number	MR38400-924K2
Capacity	128GB (2 x 64GB)
Speed	DDR5 4800 (PC5 38400)
ECC	Yes
Buffered/Registered	Registered
Chipset	Major OEM Samsung, Micron, Hynix
Voltage	1.10V
Compatible System	Supermicro
CAS Latency	CL40
Heat Spreader	No
Type	288-Pin DDR5 RDIMM
Rank	2Rx4
Features	DDR5 ECC Registered RDIMM Server Motherboard Compatible
Package Content	128GB (2X64GB) DDR5 4800MHZ PC5-38400 2Rx4 1.1V CL40 288-PIN ECC RDIMM Registered Server Memory KIT

Ερωτήσεις για αυτό το προϊόν

What does the 4800 MT/s rating deliver once the kit is installed in a SuperMicro X13SEW board?

The modules run at DDR5 4800 (PC5-38400) with CL40 latency, providing 128 GB of registered ECC capacity across two 64 GB DIMMs at the standard 1.1 V.

How does the registered DDR5 interface affect usable bandwidth on this platform?

As registered DDR5 RDIMMs the kit presents a 2Rx4 organisation that the memory controller addresses directly; the DDR5 4800 interface caps theoretical throughput at the PC5-38400 data rate.

What physical clearance does the 288-pin RDIMM need inside a 1U or 2U server chassis?

Each stick is a standard 288-pin DDR5 RDIMM without a heat spreader, so it fits the regular DIMM slot height and keying defined for the X13SEW-TF and X13SEW-F motherboards.

Επίσης σε αυτό το ράφι