Δεχόμαστε κρυπτονομίσματα — έτσι ώστε αυτά που κατέχετε να μπορούν να αγοράσουν πραγματικό εξοπλισμό.Πληρώστε σε κρυπτονομίσματα, ξοδέψτε τα σε πραγματικό εξοπλισμό. Δωρεάν ασφαλισμένη αποστολή παγκοσμίως άνω των 399 $. Ουδέτερες κούτες αποστολής, χωρίς σήμανση, από τη Γερμανία.Δωρεάν ασφαλισμένη αποστολή άνω των 399 $. Η ισοτιμία σας κλειδώνει για 30 λεπτά μόλις ανοίξει το ταμείο.Κλείδωμα ισοτιμίας 30 λεπτών. Κάθε προϊόν είναι σφραγισμένο, ελεγμένο ως προς τον σειριακό αριθμό του, και καλύπτεται από εγγύηση 24 μηνών.Σφραγισμένο, με εγγύηση 24 μηνών.

Παρακολουθούμενα είδη Σύνδεση

NEMIX RAM

NEMIX RAM 16GB DDR5 5600 CL46 1.1V 288-pin UDIMM memory upgrade

SKU CH-S6C7-DKR8X

16 GB DDR5-5600 UDIMM for Supermicro SYS-531AD-I and C9Z790-CG workstations

  • Capacity16GB
  • SpeedDDR5 5600 (PC5 44800)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.10V
  • 16 GB DDR5 5600 boosts desktop responsiveness
  • CL46 latency and 1.1 V keep power draw low
  • 288-pin UDIMM fits Supermicro SYS-531AD-I and C9Z790-CG
  • Single-rank 1Rx8 design simplifies memory controller loading
  • Samsung Micron Hynix chips validated under load for stability

Targeted Supermicro DDR5 Upgrade

This 16 GB DDR5 module is built for Supermicro desktop and workstation platforms including the SYS-531AD-I and Super C9Z790-CG. It suits IT professionals and builders who need validated, non-ECC memory for these specific systems. Buyers requiring ECC error correction or registered DIMMs for other server boards cannot use this product.

CL46 5600 MT/s Timing

The single decisive specification is the CAS latency of CL46 at the DDR5 5600 (PC5-44800) data rate. This timing determines whether the module matches the motherboard's qualified vendor list and keeps the system stable under load. No other speed grade or latency is supported by this part number.

Single Unbuffered UDIMM Package

The box contains one 1Rx8 288-pin unbuffered UDIMM operating at 1.10 V with no heat spreader. This keeps the form factor slim for dense Supermicro chassis and eliminates the need for extra cooling clearance. No additional cables, software or mounting hardware are included or required.

Βασικά χαρακτηριστικά

  • 16 GB DDR5 5600 boosts desktop responsiveness
  • CL46 latency and 1.1 V keep power draw low
  • 288-pin UDIMM fits Supermicro SYS-531AD-I and C9Z790-CG
  • Single-rank 1Rx8 design simplifies memory controller loading
  • Samsung Micron Hynix chips validated under load for stability

Προδιαγραφές

BrandNEMIX RAM
SeriesSuperMicro Server/Workstation Compatible Series Memory
ModelSuperMicro DDR5 5600MHZ Non-ECC Unbuffered UDIMM
Part NumberMD44800-618K1
Capacity16GB
SpeedDDR5 5600 (PC5 44800)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.10V
Compatible SystemSupermicro
CAS LatencyCL46
Heat SpreaderNo
Type288-Pin DDR5 UDIMM
Rank1Rx8
FeaturesDDR5 Non-ECC Unbuffered UDIMM Motherboard Compatible
Package Content16GB (1X16GB) DDR5 5600MHZ PC5-44800 1Rx8 1.1V CL46 288-PIN Non-ECC Unbuffered UDIMM

Άλλες εκδόσεις αυτού του μοντέλου

5 ακόμη στην ίδια σειρά

Ίδια οικογένεια, διαφορετική μνήμη, ψύκτρα ή συχνότητα — συγκρίνετε πριν αποφασίσετε.

Ερωτήσεις για αυτό το προϊόν

What does the 5600 MT/s rating mean when the module is installed in a Supermicro workstation?

The module runs at DDR5-5600, delivering a peak transfer rate of PC5-44800 for the supported Supermicro SYS-531AD-I and Super C9Z790-CG platforms.

How does the DDR5 UDIMM interface limit the maximum speed in this system?

The 288-pin unbuffered DDR5 UDIMM interface caps operation at the rated 5600 MT/s; the motherboard will not push the module beyond this spec.

Will the 288-pin UDIMM fit the DIMM slots on a Supermicro SYS-531AD-I workstation?

Yes, the 288-pin DDR5 UDIMM form factor matches the desktop DIMM slots used in the Supermicro SYS-531AD-I and Super C9Z790-CG systems.

Επίσης σε αυτό το ράφι

Οι πελάτες σύγκριναν και αυτά

Ίδιο ράφι, ίδιο ταμείο — οκτώ νομίσματα και κλείδωμα ισοτιμίας 30 λεπτών.